Canon WUX7500 User Manual page 75

Installation Procedure
■ High Installation, Ceiling Mounting, and Rear Projection
Projector features enable projection from a shelf or other high surface. You can also
mount the projector on the ceiling (ceiling mounting) with it turned upside down or
place it behind the screen (rear projection) if you use a translucent screen.
In [Image flip H/V] (P143) in the menu, choose a method of projection that
corresponds to how the projector is installed.
Installation on high surfaces
1
Press the MENU button on the remote control or projector, and then
select [Install settings] > [Image flip H/V].
2
Select the orientation of how the projector is installed.
Option
None
Ceiling mounted
Rear
Rear, Ceiling mounted
When setting the projector on a high surface for projection, be sure
the surface is flat and stable. Failure to do so poses a risk of the
projector falling and causing accidents or injury.
Ceiling mounting requires an optional ceiling attachment (part no.: RS-CL15) and
ceiling-mount arm (part no.: RS-CL17). Depending on the installation environment,
an extension pipe (part no.: RS-CL08 or RS-CL09) may also be required. Contact
the Canon Customer Support Center for more detailed information.
• Make sure to use the optional ceiling attachment.
• You should never install the ceiling attachment by yourself.
Ceiling mounting
Select for normal projection, without inversion.
Select when the projector is installed upside-down on the ceiling.
The projected image is inverted in both vertical and horizontal
directions.
Select this to project an image from behind the screen.
The projected image is inverted in the horizontal direction.
Select this to project an image from behind the screen with the
projector hung from the ceiling.
The projected image is inverted in the vertical direction.
75
Rear projection
Function