Canon WUX7500 User Manual page 202

Projector Web Screen Menu
SNMP Settings [SNMP]
From [SNMP] in the settings screen, you can configure the settings related to
control of projectors which use SNMP (Simple Network Management Protocol). For
the setting procedure, see "Network Setting" (P89).
Item
SNMP
Receive community
Password
Confirm password
Explanation
Select the SNMP function version. If
[OFF] is selected, the other settings in
this screen cannot be configured.
Enter the community name which will
receive projector information in 1-byte
alphanumeric characters and symbols
(1 – 15 characters).
Enter the community settings password
in 1-byte alphanumeric characters and
symbols (8 – 15 characters). It can be
set only when the SNMP version is V3.
For confirmation, enter the same
password as you entered in [Password].
202
Factory default setting
OFF
<Blank>
<Blank>
<Blank>