Canon WUX7500 User Manual page 130

Menu Description
Progressive
> [Input settings] >
Performs progressive processing optimized for still images in cinematic content or
moving images in videos, when interlaced HDMI signals are supplied.
Option
Off Does not perform progressive processing.
Suitable for still images or typical moving images. Performs progressive
Film/auto
processing for video or cinematic content.
Suitable for projecting video with high image quality and relatively slow
Video 1
movement. Performs progressive processing optimized for HD video.
Suitable for projecting video with faster movement. Performs
Video 2
progressive processing optimized for fast-moving video.
Performs progressive processing optimized for 1080 PsF/25 or
25p/30p(PsF)
1080 PsF/30 video (25 or 30 fps, respectively).
• Select [Off] when flickers and horizontal lines are noticeable in media that has a lot of
fast-moving action.
• Not available in split-screen mode.
Slideshow interval
> [Input settings] >
You can project images on a USB flash drive automatically, one after another.
Use the [ ] / [ ] buttons to set the interval after which images are switched in a
range of 1 seconds to 60 minutes, in the format min.:sec.
• Switching the input signal to an option other than [USB] will stop any slideshow in
progress. To resume the slideshow from the last image shown, return the input signal to
[USB].
• If you use digital zoom during a slideshow, the digital zoom will be cancelled when you
switch to the next image.
Animation effect
> [Input settings] >
Specify the transition for slideshows of images on a USB flash drive.
Option
Off Disable slideshow transitions.
Cross fade Fade out one image as the next image fades in.
Fade out/in Fade out one image to black, and then fade the next image in.
[Progressive]
[Slideshow interval]
[Animation effect]
130
Function
Function