Canon WUX7500 User Manual page 185

Menu Description
PJLink
> [Network settings] >
You can enable or disable the PJLink network function of the projector.
When the function is turned on, control is possible via the network using commands
that meet PJLink standards.
Option
Off
On
• The projector conforms to Class 2 as defined in PJLink standards established by the
Japan Business Machine and Information System Industries Association (JBMIA). This
projector supports all commands that are defined by PJLink Class 2, and PJLink
compatibility has been verified.
- The port number for PJLink command transmission is 4352 (TCP).
- The port number for PJLink device searching is 4352 (UDP).
- For details on using PJLink, see "Setting PJLink [PJLink]" (P203).
Sources and corresponding input terminals
Input source number
11
12
13
31
32
33
41
51
52
What is PJLink?
It allows centralized control of projectors and operation from a controller for all projectors
regardless of manufacturer.
The objective is for JBMIA to improve convenience for users and expand the use of
projectors through early systemization for network monitoring and control of projectors,
which will become the mainstream in the future.
Class 1: Standardization of control and monitoring specifications for basic projector
functions
Class 2: Standardizes commands added to Class 1, device searching, state notification,
and IPv6 support.
For PJLink specifications, visit the Japan Business Machine and Information System
Industries Association website.
PJLink website: http://pjlink.jbmia.or.jp/english/
[PJLink]
Disables the PJLink function.
Enables the PJLink function.
Input signal name
Analog PC-1
Analog PC-2
Component
Digital PC
HDMI
DisplayPort
USB
LAN
HDBaseT
185
Function