Turn The Projector Off - Canon WUX7500 User Manual

Projection Procedure
3
As you view the test pattern, perform [Gamma] (P136) adjustment from
the [Image adjustment] menu until the image is optimal.
4
Press the OK button after the setting.
Perform one of the followings to obtain an appropriate projection:
• Darken the ambient light
• Reduce the image size
• Reduce the projection distance

Turn the Projector Off

1
Press the POWER button.
Remote control
2
When this window is displayed,
press the POWER button again.
After you turn the power off, the
projector will enter standby mode
once it cools down.
• If you want to continue projecting without turning off the power, press a button other
than POWER, or else wait until the confirmation message disappears.
• After turning off the projector, wait at least 5 minutes before turning it on again. It may
shorten the lamp life if you turn on the projector immediately after turning it off.
• Using the projector for extended periods may shorten the life of the lamp and internal
optical components.
• Unplug the projector if it will not be used for an extended period. Note that the [Date
and time] setting will be reset, so you will need to set it again.
• In power management mode, the projector may go off automatically after some time
(P162).
Projector
49