Side Control; Led Indicators - Canon WUX7500 User Manual

Before Use

■ Side Control

(6)
(5)
(1) POWER button (P44, P49)
Turns the projector on or off.
(2) INPUT button (P45)
Switches the input signal.
(3) LENS button
Each time the button is pressed,
the screen changes to focus
adjustment (P46), zoom (image
size) adjustment (P46), or lens shift
(image position) adjustment (P68).
To adjust, use the [ ] / [ ] or the
[ ] / [ ] buttons.
(4) MENU button (P119)
Displays a menu on the screen.

■ LED Indicators

The projector status is shown by the LED indicators (off / lit / flashing).
• POWER (green)
• STANDBY (red)
• WARNING (red)
• LIGHT (orange)
• TEMP (red)
(4)
: Lights up or flashes under normal
: Lights up or flashes during standby or
: Lights up or flashes when an error occurs.
: Lights up or flashes when a problem
: Lights up or flashes when the internal
33
(3) (2) (1)
(5) Pointer / VOL buttons (P117)
Up, down, left, or right in menu
navigation or other operations.
Adjusts the sound volume.
[ ] VOL+ button: Increases the
volume.
[ ] VOL– button: Decreases the
volume.
(6) OK button (P117)
Determines the item selected from
the menu.
conditions when the power is on.
when the projector is shut down.
occurs with the lamp or lamp cover.
temperature is high.