Canon WUX7500 User Manual page 151

Menu Description
Submenu
Show the blending area markers.
Marker
Reset Reset the marker settings.
Correct image distortion by aligning corners of the blending area with
the image from the reference projector. For multi-projection alignment,
align the corners with the projector blending area (already adjusted)
that forms the basis.
Corner
adjustment
Left, Right,
Top,
Bottom
Lens - Position
> [Install settings] >
The projector can save information about the lens position in memory. Up to three
sets of lens information (including focus, zoom, and lens shift settings) can be
saved, and the lens can be restored to these positions.
Submenu
Load position 1 – 3 Restores the lens to the positions saved using Save position 1 – 3.
Save position 1 – 3 Saves the lens position as Save position1 – 3.
Restores the lens to the preset position.
Lens shift reset
Option
Off Hide the blending area markers.
Show the blending area markers. The start marker is
On
red, and the end marker is green.
Points to adjust
Select the direction of the blending area to adjust. As
you reposition the corners of the selected area, the
overall image changes to match the adjustment.
• Sides set to an edge-blending width of 12 or more can be
adjusted when [Keystone] is set to [Corner adjustment] and
the aspect ratio is [16:10].
• To reset adjustment, use [Keystone] (P145).
[Lens - Position]
• The preset position differs depending on the type of lens.
• The preset position also changes when the orientation of the
projector is changed, due to the ceiling mounted setting, etc.
Example: [+50%, 0%] > [-50%, 0%]
151
Function
Function
Blending area
Function