Screen Color Adjustment - Canon WUX6000 User Manual

Installation-Related Menu Settings
• To lock (protect) the saved position, set
[Positional lock] (P141) to [On].
• [Load position] is not available unless you
perform [Save position] once.
• The values of the following settings are
saved in addition to the lens position
information:
- Horizontal/vertical keystone / corner
adjustment
- Screen color
- Screen aspect
- Zoom
- Digital image shift
• The original lens position varies depending
on the type of lens used.
• When saved lens positions are
restored, images may be projected
in a slightly different position than
the saved position.
• Specifying a somewhat smaller
image size than the screen size
(image area) enables you to switch
among multiple lens positions
without having the image extend off
the screen.
• When precise positioning is needed,
use lens shift, zoom, and focus
functions for fine adjustment.
Screen Color
Adjustment
> [Install settings] >
HDMI
Digital PC
You can adjust the color quality of
the images projected according to
the color of the projection screen.
Normal Select this if a standard type of
projection screen is used. The
images are projected in a light
quality similar to that of natural light.
Greenboard Select this if a greenboard (dark
green color) is used for the
projection screen. The color quality
similar to [Normal] is obtained on
the greenboard.
Adjust Select this to make detailed
adjustment.
The following popup screen will
appear.
Press the [ ] / [ ] buttons to select
a color.
[ ] makes the color selected
darker.
[ ] makes the color selected
lighter.
Press the OK button to accept your
setting and then press the MENU
button.
• [Normal] is the factory default.
148
[Screen color]
Component LAN
Analog PC USB