Split Screen - Canon WUX7500 User Manual

Menu Description
Slideshow interval
Specify the interval after which slideshow images are switched. Enter the time in a range of 5
seconds to 10 minutes, in the format min.:sec.
This setting is available when the mode is set to [Primary].
If the projector is turned off and then on again during a slideshow in PC-free multi
projection mode, the slideshow automatically resumes from the first image in the folder
last used for projection.
Animation effect
Specify the animated slideshow transition.
This setting is available when the mode is set to [Primary].
Option
Off Disable slideshow transitions.
Cross fade Fade out one image as the next image fades in.
Fade out/in Fade out one image to black, and then fade the next image in.

Split screen

> [Input settings] >
Two input images from devices connected to the projector can be projected side by
side.
Option
Off Exit split-screen mode.
On Activate split-screen mode.
Settings
• Control can be switched to the other side by pressing the [ ] / [ ] on the remote
control when
• When you switch to split-screen display, the left and right signals and input status are
shown in the input window.
For details on split-screen mode, see "Projecting Two Images Side by Side" (P58).
[Split screen]
Submenu
Split screen Switch between normal and split-screen projection.
Select the image to control. When the left image is
Control rights selected, [1] is displayed, and when the right image is
selected, [2] is displayed.
Swap right-
Switch the sides that images are projected on.
left
Mode 3-7
Mode 5-5
Layout
Mode 7-3
( ) or ( ) is displayed in the center of the image area.
132
Function
Function
Function
Use 30% of the screen width for the left
side and 70% for the right.
Use 50% of the screen width for the left
side and 50% for the right.
Use 70% of the screen width for the left
side and 30% for the right.