Canon WUX7500 User Manual page 200

Projector Web Screen Menu
Setting Up Email [Mail]
From [Mail] in the settings screen, you can set the items necessary to send error
mails and test mails. For the setting procedure, see "Network Setting" (P89).
Item
Error report
To:
Cc:
From:
IPv4 SMTP server IP
address
IPv4 SMTP server port
number
IPv6 SMTP server IP
address
IPv6 SMTP server port
number
Mail resend interval*
Explanation
Select whether to turn the error mail
sending function on or off, and IPv4 or
IPv6 for the network to use.
Enter the recipient address for error
mails in 1-byte alphanumeric characters
and symbols (1 – 63 characters).
Enter the CC address for error mails in
1-byte alphanumeric characters and
symbols (1 – 63 characters).
Enter the sender address for error mails
in 1-byte alphanumeric characters and
symbols (1 – 63 characters).
Enter the SMTP server IP address
(IPv4) in 1-byte numbers.
Enter the SMTP server port number
(IPv4) in 1-byte numbers (1 – 65535).
Enter the SMTP server IP address
(IPv6) in 1-byte numbers.
Enter the SMTP server port number
(IPv6) in 1-byte numbers (1 – 65535).
Enter the interval for resending mail
when an error occurred (unit: seconds)
within the range of 0 – 59 seconds
using 1-byte numbers.
200
Factory default setting
OFF
MailUserAccount
<Blank>
Projector@canon.co.jp
0.0.0.0
25
<Blank>
25
10