Canon WUX7500 User Manual page 131

Menu Description
PC-free multi projection
> [Input settings] >
Specify settings when projecting images on a USB flash drive to multiple networked
projectors. For instructions, see "Using PC-Free Multi Projection" (P112).
Mode setting
Specify the mode for PC-free multi projection: Primary
*1
Connect a USB flash drive and stream images for projection to Secondary projectors.
*2
Project images streamed from the Primary projector.
Option
Off Disable PC-free multi projection.
Primary Projection in Primary mode.
Secondary Projection in Secondary mode.
Before specifying the mode, confirm that you are using a wired network connection
and that [Network (wired/wireless)] is set to [On/Off] or [On/On (Pj AP)] (P175).
Layout pattern setting
Specify the total number of projectors and the layout pattern (P113).
Option
Specify the total number of projectors, including all Primary and
Total number
Secondary projectors. 2 – 9 projectors can be specified.
Select a layout pattern. Images from the Primary projector are
Layout pattern
streamed to the upper left in the layout pattern.
Destination projector setting
Specify IP addresses of projectors set to Secondary mode.
Option
Enter the IP address of destination projectors. The projector in Primary
IP address mode is identified as [1]. The wired IP address specified in [Network
settings] is displayed.
Stream projection to the Secondary projector with the corresponding
Confirm
number (2 – 9), as specified in the IP address field.
Enter Confirm the IP address of destination projectors.
[PC-free multi projection]
131
*1 *2
or Secondary mode.
Function
Function
Function