Remote Control - Canon WUX7500 User Manual

Before Use

Remote Control

■ Part Names and Functions
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(1) POWER button (P44, P49)
Turns the projector on or off.
(2) D.ZOOM button (P53)
Zooms the image in or out digitally.
[1] button: Zooms the image in (up to
12x).
[4] button: Zooms the image out (1x
minimum).
[ ] / [ ] / [ ] / [ ] buttons:
Move the zoom-in location.
(3) Fn button (P160)
Can be assigned a specific function.
(4) Pointer buttons (P117)
Selects the upper, lower, left or right
item in the menu. Also used to assign a
channel to the remote control.
(5) OK button (P117)
Determines the item selected from the
menu.
(6) FOCUS button (P46)
Adjusts focusing.
[ ] / [ ] buttons:
Moves the focus position further away.
[ ] / [ ] buttons:
Moves the focus position nearer.
(7) ZOOM button (P46)
Adjusts the image size.
[ ] / [ ] buttons:
Increase the image size.
[ ] / [ ] buttons:
Decrease the image size.
(8) INPUT A-C button (P160)
Can be assigned to input signal selection
(one source for each of the three buttons).
(9) ASPECT button (P100, P127)
Changes the aspect ratio of the
projected image.
(10) TEST PATTERN button (P152)
Displays the test pattern.
(11) Ch button (P159)
Changes the remote control channel.
(12) IMAGE button (P47)
Switches the image mode (image
quality).
(13) FREEZE button (P50)
Freezes the projected image.
36