Date And Time Settings - Canon WUX7500 User Manual

Menu Description
Register password
You can register a password for starting projection.
Enter a 4 digit password.
Enter the password using the pointer buttons [ ] (1) / [ ] (2) / [ ] (3) / [ ] (4) or the number
buttons on the remote control.
The 4-digit password is entered from the left to right digits. When the final digit is entered, the
password is automatically registered.
Press the MENU button to abort the registration.

Date and time settings

Set time settings such as the current date and time, date/time display format, daylight saving
time, and time zone.
Submenu
Set the date and time. The date and time currently set are shown and
updated each second.
Date and time
Choose [Year/month/date], [Month/date/year], or [Date/month/year] as
Date display
the date display format shown for the date and time, in schedules, and
format
elsewhere.
Adjusts the time one hour ahead at the beginning of daylight saving
time and one hour back at the end. The timing of daylight saving time
must be set in advance.
Daylight saving
time
Select a city in the time zone where the projector is installed.
Region
The time zone of the city selected in [Time zone] is shown.
The display is blank if the [Date and time] setting has not been
set.
Submenu
Date Enter the date.
Time Enter the time.
Confirms your entered values. At this time [Date and
Enter
time] starts operating.
• The date/time display format is set in [Date display format].
• Settings may be reset if the projector is left unplugged for an
extended period.
Option
Off Disable daylight saving time.
On Enable daylight saving time.
Edit when daylight saving time starts and ends. Set
Edit the month, day, and time on the editing screen shown
next for the starting and ending date/time.
[On] in [Daylight saving time] is not available until the starting
and ending timing are set.
166
Function
Function
Function