Canon WUX7500 User Manual page 167

Menu Description
Submenu
Select whether to sync the time on the projector using SNTP (Simple
Network Time Protocol).
SNTP
Schedule
Some projector tasks can be automated by scheduling them. As the timing of scheduled
tasks, choose from [Default], which is not during a certain period, or one of five special period
times that you set up.
The [Period] setting of a special period cannot be set to overlap with another period.
Option
Default Set a general schedule that is not during a specific period.
Special period
Set up to five specific periods to schedule operation.
1 – 5
• [On] is grayed out until you set the period in [Special period 1] to [Special period 5].
• [On] and [Off] are grayed out for periods in [Special period 1] to [Special period 5]
that have already passed.
• Setting any schedule to [On] changes [Standby power setting] (P162) to [Normal].
• Tasks scheduled under the [Default] setting are not executed while special period
schedules are in effect.
Submenu
On (IPv4) Use SNTP over an IPv4 connection.
On (IPv6) Use SNTP over an IPv6 connection.
Off Disable SNTP.
• [SNTP] is not available when [Network (wired/wireless)] is set
to [Off/Off].
• Use the web screen to set the IP address of the SNTP server.
[SNTP] is not available unless the SNTP server IP address
has been set.
167
Function
Function
Function