Canon WUX7500 User Manual page 114

Special Arrangements
3
Configure some projectors as Secondaries.
Select [Input settings] > [PC-free multi projection] > [Mode setting] >
[Secondary].
Complete this setting on each Secondary projector.
4
Configure one projector as the Primary projector.
(1) Select [Input settings] > [PC-free multi projection] > [Mode setting] >
[Primary].
(2) Configure the following settings in [PC-free multi projection].
• [Layout pattern setting]
Specify the total number of projectors and the layout pattern (P113).
• [Destination projector setting]
Specify Secondary projector IP addresses.
• [Slideshow interval]
Specify the slideshow interval (5 seconds to 10 minutes).
• [Animation effect]
Specify the transition to use for slideshows.
114