Chapter 3 Setting Up The Zoll Ventilator - ZOLL AEV Operator's Manual

This chapter describes how to set up the ZOLL Ventilator. It lists the tasks required to set up the
ventilator for safe, effective use, and describes each task in detail.
Warning! You must always properly set up the ventilator before use. Failure to do so can result in
inadequate care or death of the patient.
To set up the ZOLL Ventilator, you must perform the following tasks:
1. Attach the Ventilator Circuit
Attach the High Pressure Oxygen Supply (Optional)
2.
Inspect Fresh Gas Intake Filters
3.
Connect Fresh Gas Intake Attachments
4.
Select the Ventilator's Power Source
5.
Power on the Ventilator
6.
7. Select Start Up Default Values
Select Operating Mode (Optional)
8.
Change Parameter Values
9.
Change Ventilator Settings
10.
11. Perform Operational Test
Attach the Pulse Oximeter Probe (Optional)
12.
Attach Patient
13.
We describe how to perform these tasks in the following sections of this chapter.
906-0731-01-05 Rev. C
Setting Up the ZOLL Ventilator
ZOLL Ventilator Operator's Guide
Chapter 3
3-1