Lightfield Experiment Setup; Common Acquisition Settings Expander; Figure 5-23: Typical Common Acquisition Settings Expander - Princeton Instruments PI-MAX4 Manual

90
5.14

LightField Experiment Setup

Initial experiment setup for LightField is an easy process. If the PI-MAX4 is powered on when
LightField is launched, the camera will automatically be detected and its icon will be placed in
the
Available Devices
area, the appropriate expanders are loaded in the
time LightField has been launched with this specific camera, the default settings for the camera
will have been loaded into the expanders.
The following sections provide brief descriptions of many

5.14.1 Common Acquisition Settings Expander

Figure 5-23

Figure 5-23: Typical Common Acquisition Settings Expander

®
PI-MAX 4 System Manual
area. When the camera icon is dragged into the
REFERENCES:
For detailed information about each expander, refer to the
LightField online help.
illustrates a typical Common Acquisition Settings expander.
Experiment Devices
stack. If this is the first
Experiment Settings
Experiment Settings
Issue 9
expanders.