Figure 7-20: Experiment Setup: Timing Tab; Figure 7-21: Experiment Setup: Main Tab - Princeton Instruments PI-MAX4 Manual

Chapter 7
14. Configure experiment parameters from the
a.

Figure 7-20: Experiment Setup: Timing Tab

b.

Figure 7-21: Experiment Setup: Main Tab

WinX and Gated Operation
Click on the tab and configure the timing as shown in
Timing
Click on the tab, select
Main
The number of spectra is automatically updated depending on the number entered
on the Sequential Gating Setup
NOTE:
In , the photocathode is biased on only for the time
Gate Mode
that each gate pulse is applied. This limits the risk of damage
resulting from room light. However, there is a risk of damaging
overload from intense light sources such as lasers.
Experiment Setup
, and enter the desired
Gate Mode
dialog. See Figure 7-21.
145
dialog.
Figure 7-20.
4411-0139_0053
.
Intensifier Gain
4411-0139_0060