Configuring Photon Detection; Figure 14-18:Typical Online Processes Expander: Photon Detection; Figure 14-19:Typical Thresholding And Clipping Configuration Parameters - Princeton Instruments PI-MAX4 Manual

Chapter 14

14.3.1 Configuring Photon Detection

Perform the following procedure to configure Photon Detection:
1. Photon Detection
Figure

Figure 14-18:Typical Online Processes Expander: Photon Detection

Within the
2.
Supported modes are:
Both
3.
default value is 1000 counts, but can easily be updated depending on the specific
experiment requirements.
Figure 14-19

Figure 14-19:Typical Thresholding and Clipping Configuration Parameters

PI-MAX4: EM Family
is enabled and configured on the
14-18.
Photon Detection
[default];
• Disabled
;
• Thresholding
;
• Clipping
and
Thresholding Clipping
shows the
Threshold
Online Processes
section, select the desired
require the
Threshold
field for both
Thresholding
expander. See
.
Mode
, in counts, be specified. The
and modes.
Clipping
237