Swept Gate Experiment [Variable Width, Variable Delay]; Static Gate Experiment [Fixed Width, Fixed Delay]; Figure 7-31: Repetitive Gating Setup Dialog - Princeton Instruments PI-MAX4 Manual

152
7.5.3

Swept Gate Experiment [Variable Width, Variable Delay]

The procedure for conducting a Swept Gate experiment with variable width and variable
delay is the same as that for conducting a Swept Gate experiment with fixed width and
variable delay with the following parameter configuration changes:
•
•
Refer to
additional information.
7.5.4

Static Gate Experiment [Fixed Width, Fixed Delay]

The procedure for conducting a Static Gate experiment is similar to that for conducting a
Swept Gate experiment with the following parameter configuration changes:
•
•

Figure 7-31: Repetitive Gating Setup Dialog

Refer to
information.
®
PI-MAX
value does not equal
Gate Delay Start
value does not equal
Gate Width Start
Section 7.5.3, Swept Gate Experiment [Variable Width, Variable
: ;
Gate Mode Repetitive
and
Gate Width Gate Delay
dialog as shown in
Setup
Section 7.5.4, Static Gate Experiment [Fixed Width, Fixed
4 System Manual
Gate Delay End
Gate Width End
must be configured using the
Figure 7-31.
Issue 9
value;
value.
Delay], for
Repetitive Gating
4411-0139_0069
Delay], for additional