Table of Contents
Advertisement
Lattice Semiconductor
IP Core Generation
Figure 4-1. IPexpress Dialog Box (Diamond Version)
Note that if the IPexpress tool is called from within an existing project, Project Path, Module Output (Design Entry in
ispLEVER), Device Family and Part Name default to the specified project parameters. Refer to the IPexpress tool
online help for further information.
To create a custom configuration, the user clicks the Customize button in the IPexpress tool dialog box to display
the 10 Gb+ Ethernet MAC IP core Configuration GUI, as shown in
Figure
4-2. From this dialog box, the user can
select the IP parameter options specific to their application. Refer to
"Parameter Settings" on page 14
for more
information on the 10 Gb+ Ethernet MAC IP core parameter settings.
IPUG39_02.9, December 2010
17
10 Gb+ Ethernet MAC IP Core User's Guide
Advertisement
Table of Contents
