Menu Operations
ENT
Up Key
Down Key
Left Key
Right Key
SHIFT + ESC
SHIFT + TRIG
SHIFT + ENT
SHIFT + Up Key
SHIFT + Down Key
Note
1. Commands cannot be input during menu operation.
2. Input CTRL + Q to re-input commands to change from the menu operation to
2-1-3
Menu Tree
F400 menus are hierarchical. The cursor is moved to the required functions to set
measurement conditions. Use the following procedure to move around the menu
tree.
Menu Tree:
1. Move the cursor to the desired function using the Up, Down, Left, and Right
2. Press the ENT Key. In this example, the cursor will move to the Adjust menu.
3. Press the ESC Key. The display will move to the previous menu level (i.e., the
2-1-4
Inputting Values
This section explains how to input numeric values when setting measurement condi-
tions. There are two input methods.
Specifying the Input Digit
Specifying the input digit is used mainly for setting judgements and system condi-
tions.
10
Console key
Console key
command input.
p. 5
Cursor Keys.
Adjust
Position compensation
Measurement region
Expression
Repeat this step to move to lower levels.
Adjust
Position compensation
Adjust
Measurement region
Region
Expression
screen shown in step (1)).
RS-232C input
Key
CTRL + M
CTRL + E
CTRL + X
CTRL + S
CTRL + D
TAB, CTRL + I
CTRL + T
CTRL + R
CTRL + W
CTRL +Z
1
2
Section
Code
($0D)
($05)
($18)
($13)
($04)
($09)
($14)
($12)
($17)
($1A)
— Filter/Pickup —
— Filter/Pickup —
2-1