Streaks On The Film - Kodak EKTASCAN 160 User Manual

Streaks on the Film

5E2234 June 2000
Streaks can be caused by debris on the Processor Roll-
ers. This can occur when the system is inactive. To elimi-
nate the streaks, run 3 films to the Processor before
normal operation.
IMPORTANT: Do not use this film for calibrating
the Laser Imager. This procedure is to be done
only to eliminate streaks on the film.
From the Main Display, press the Menu Button. The
1.
Main Menu is displayed.
Use the " " to move the ">" to "Calibrate Printer".
2.
Press the Menu Button. The Calibrate Printer Screen
is displayed.
The Calibrate Printer Screen displays the calibration
time and date for the currently selected destination.
Ready
Exit Menu
Access Receive
Access Supply
>Calibrate Printer
Setup Menu
Film Destination
Use the " " to select Print Cal Film. Press the
3.
Menu Button.
Ready
Processor
Last calibrated on
13-Dec-1998 07:24
Exit Menu
>Print Cal Film
Calibration Data
Retrieve the film from the Processor Receive Bin.
4.
5. Return to normal operation.
Troubleshooting
5-29