Changing The Decimal Point Convention - Kodak EKTASCAN 160 User Manual

Changing the Decimal Point Convention

5E2234 June 2000
To comply with local conventions, change the convention
for the decimal point from a "." to a ",". For example 0.00
to 0,00. To change the convention, do the following:
From the Main Display, press the Menu Button. The
1.
Main Menu is displayed.
Ready
>Exit Menu
Access Receive
Access Supply
Calibrate Printer
Setup Menu
Film Destination
Use the " " to move the ">" to "Setup Menu". Press
2.
the Menu Button. The Setup Menu Screen is dis-
played.
Ready
Actuations: 5,567
>Exit Menu
0.00 to 0,00
Screen Contrast (7)
3. Use the " " to move the ">" to "0.00 to 0,00". The
menu selection appears with the currently selected
decimal point in the number to the left of "to". Press
the Menu Button to change to the desired symbol.
Use the " " to move the ">" to Exit Menu. Press the
4.
Menu Button 2 times to return to the Main Display.
Operation
3-13