Kodak EKTASCAN 160 User Manual page 13

Safety
CAUTION
Remove the wall plug before servicing equipment.
This equipment is operated with hazardous voltage
that can shock, burn, or cause death.
Do not pull the cord from the outlet. Grasp the plug
and pull to disconnect.
Do not operate equipment with a damaged power
cord. Position the power cord so that it will not be
tripped over or accidentally pulled.
Do not use extension cords to power the Laser
Imager. Connect the equipment to grounded outlets.
Refer to the Site Specifications for the KODAK
EKTASCAN 160 Laser Imager, Publication No.
5E2235 for additional details.
This equipment generates, uses, and can radiate
radio frequency energy. If not installed and used in
accordance with the instruction manual, it may cause
interference with radio communications.
This equipment has been tested and found to be
exempt from the limits for a Class A computing device
pursuant to Part 15, Subpart J of FCC Rules. This is
designed to provide reasonable protection against
such interference when operated in a commercial
environment.
Operation of this equipment in a residential
environment is likely to cause interference, in which
case the user, at the user's own expense, will be
required to take whatever measures may be required
to correct the interference.
1-5
5E2234 June 2000