Kodak EKTASCAN 160 User Manual page 10

Safety
Responsibility of the Manufacturer
1-2
IMPORTANT: To meet Electromagnetic Compatibility
requirements at a frequency of 50 Hz, the 160 Laser
Imager and the Medical Image Manager 200 were con-
nected to the Power Kit/for KODAK PACS Link Medical
Image Managers, Catalog No. 198 4160. Please refer to
"Safety Standards and Regulatory Approvals" in the Site
Specifications for the KODAK EKTASCAN 160 Laser
Imager, Publication No. 5E2235.
The manufacturer is responsible for the effects on safety,
reliability, and performance of the 160 Laser Imager when
the following conditions are followed:
Assembly operations, extensions, readjustments,
modifications or repairs are carried out by persons
authorized by the manufacturer.
The electrical installation of the site complies with the
site specification requirements.
Operation of the 160 Laser Imager complies with the
instructions for use in the User Guide.
NOTE: Please refer to the Site Specifications for
the KODAK EKTASCAN 160 Laser Imager,
Publication No. 5E2235, for site preparation
information.
5E2234 June 2000