Troubleshooting
Replacing the Air Filter
5-28
Optics
Module
Door
Air Filter
H178_0065ACC
H178_0065AC
NOTE: It is recommended that you replace the
Air Filter once a year.
Every six months it is recommended that you carefully remove the Air Fil-
ter and rotate the Air Filter 180°. Do not change the direction of the Air
Filter when you install it back in the Laser Imager. This will prevent dust
from accumulating in the Laser Imager. Do the following to access the
Air Filter.
1.
From the Main Menu, press "Access Film Supply".
Wait for the indicator to illuminate steady before pro-
ceeding.
2.
Turn off the Laser Imager.
Open the Front Door of the 160 Laser Imager.
3.
4.
Open the Optics Module Door.
Remove the Air Filter and replace if necessary.
5.
Contact Kodak Distribution to order a new Air Filter/
for KODAK EKTASCAN 160 Laser Imager Catalog
Number 116-1272.
Close the Front Door.
6.
Turn on the Laser Imager.
7.
5E2234 June 2000