Kodak EKTASCAN 160 User Manual page 28

Overview
Status Section
2-12
Initializing The Laser Imager is in the process of
warming up.
The Laser Imager is in the process of
Printing
printing films. The Laser Imager is also
accepting commands and data from the
MIM.
Not Printing The Laser Imager has stopped printing
films. Any pages that are already in
progress will finish printing. The Laser
Imager accepts commands and data in
this state.
Ready The Laser Imager is ready to print. The
Laser Imager accepts commands and
data in this state.
Testing
The Laser Imager is not printing films
from the imaging devices, but is printing
test films or transporting films. The
Laser Imager is accepting commands
and data from the MIM.
Offline The offline condition is shown in a right-
justified position on the Status Line.
When offline, the Laser Imager is not
accepting commands or data from the
MIM. The offline condition may exist
during power-up diagnostics and initial-
ization, after certain errors and when
diagnostics are run by a Service Repre-
sentative.
5E2234 June 2000