Interface Selection - Epson TM-H6000V Technical Reference Manual

Receipt print speed
Selectable from levels 1 to 14 (Slow ~ Fast)
Default setting*: level 13 or 14
 Varies depending on the model.
Depending on print conditions, such as print duty, print head temperature, and data transmission
speed, print speed is automatically adjusted, which may cause white lines due to intermittent print
(the motor sometimes stops). To avoid this, keep the print speed constant by setting it lower.
Character code table defaults
Selectable from 43 pages including user defined page
Default setting: PC437: USA, Standard Europe
International character defaults
Selectable from 18 sets
Default setting: USA
Command execution during offline
 Enabled
 Disabled (default settings)

Interface selection

 Fixed to UIB
 Fixed to built-in USB
 Fixed to Ethernet /Wi-Fi (When installing an interface)
 Auto: Built-in USB automatic switching
 Multiple: All interfaces enabled (default setting)
Interface switch wait time
Select from 1 to 10 seconds (in intervals of 1 second)
1 second (default setting)
Main interface selection
 Auto: interface that receives data first (default setting)
 USB
 Wi-Fi or Ethernet
 No main connection I/F
Chapter 3 Advanced Usage
64
3