Printing Specifications - Epson TM-H6000V Technical Reference Manual

Printing Specifications

Slip printing
Printing method
Head wire configuration
Printing direction
*
Printing speed
Characters per line
Character dot spacing
lps: lines per second
cpi: characters per inch
 when the head energizing time is set to normal mode.
Printing speed may be slower, depending on such items as the data transmission speed.
Serial impact dot matrix
9-pin vertical line, wire pitch approximately 0.353 mm {1/72"}
Bidirectional, minimum distance printing
Front Approximately. 5.7 lps
(printing 40 columns per line with 17.8 cpi)
Endorsement Approximately. 4.0 lps
(printing 40 columns per line with 21.2 cpi)
Front Font A (initial setting): 45
Font B: 60
Endorsement Font A: 25
Font B: 33
Endorsement font (initial setting): 40
Front Font A (initial setting): 1 dot
Font B: 2 half dots
Endorsement Font A: 1 dot
Font B: 2 half dots
Appendix
129