Handling
This chapter describes basic handling of the printer.
CAUTION
Installing and Replacing Roll Paper
Follow the steps below to install/replace the roll paper.
1
Make sure the printer is turned on.
2
Open the roll paper cover.
3
Remove the used roll paper core, if there is one, and insert the roll paper in the cor-
rect direction.
Be sure to use the specified paper.
Do not insert any paper that has clips or staples. This may cause paper jams and damage.
Make sure the slip/validation paper is flat, without curls, folds, or wrinkles.
("Receipt printing" on page
130)
Chapter 5 Handling
5
91