Interface Selection - Epson TM-T70II Technical Reference Manual

 Usually, the number of head energizing parts does not need to be changed.
 When printing at the maximum speed, select "One-part energizing."
Character code table default
Selectable from 43 pages including user defined page
Initial setting: Page 0 (PC437: USA, Standard Europe)
 For the character code table, see
 User-defined page is not supported by South Asia font models.
International character default
Selectable from 18 sets
Initial setting for Simplified Chinese models: China
Initial setting for ANK models, Traditional Chinese models, and South Asia font models: USA
For the character code table, see

Interface selection

Selectable from: automatic selection (initial setting), fixed to UIB interface, or fixed to built-in
USB. The table below describes the modes you can set for the printer to control the dual
interfaces.
Interface mode
Automatic selection
Fixed to UIB
Fixed to built-in USB
 Automatic selection
 Once the interface is selected, the selection is enabled until the power is turned off or the
58
Serial/Parallel
*1
Available
Available
Not available
 *1: The interface of either the serial/parallel or built-in USB to which data is transmitted
first is selected.
 *2: When the USB cable is connected with a host PC, the USB interface is selected.
printer is reset.
"Character Code Tables" on page
"International Character Sets" on page
UIB interface
Interface other
than Serial/Parallel
*2
Available
Available
Not available
112.
156.
Built-in USB
*1,*2
Available
Not available
Available