Paper Specifications - Epson TM-H6000V Technical Reference Manual

Paper Specifications

Slip printing
Types
Form
Size (W × L)
Thickness Normal paper (singleply)
Copy paper (front)
Copy paper (endorsement)
 Copy capability is greatly influenced by the ambient temperature, so printing must be performed
under the conditions described below.
Copy paper
(front)
Copy paper
(endorsement)
 The slip paper must be flat and without curls, folds (especially curls or folds at the top edges),
curves, or wrinkles. Otherwise, it may rub against the ink ribbon and become dirty.
 The slip holding roller may make marks on the copy paper.
 Print position may shift for the top and bottom sheets of multi-ply paper; therefore, when
formatting slip paper, take this into account.
 Use thinner paper (N30 or equivalent) between the top and bottom sheets of multi-ply paper. If
thick paper is used, the copy capability is lowered.
 The slip paper must be flat, without curls or wrinkles, especially at the top edges.
Normal paper, pressure sensitive paper, carbon copy paper
Slip paper
68 to 230 mm × 68 to 297 mm {2.68 to 9.06" × 2.68 to 11.69"}
The minimum size is 68 × 152 mm {2.68 × 5.98"}.
0.09 to 0.22 mm {0.0035 to 0.0087"}
Backing paper: 0.07 to 0.12 mm {0.0028 to 0.0047"}
Copy paper, original paper: 0.04 to 0.07 mm {0.0016 to 0.0028"}
Carbon copy paper: Approximately. 0.035 mm {0.0014"}
Total thickness: 0.09 to 0.47 mm {0.0035 to 0.0185"}
Backing paper: 0.07 to 0.12 mm {0.0028 to 0.0047"}
Copy paper, original paper: 0.04 to 0.07 mm {0.0016 to 0.0028"}
Copy carbon paper: Approximately. 0.035 mm {0.0014"}
Total thickness: 0.09 to 0.31 mm {0.0035 to 0.0122"}
Number of copies Total thickness
original + 3 copies 0.31 mm or less
original + 2 copies 0.31 mm or less
original + 2 copies 0.47 mm or less
original + 3 copies 0.31 mm or less
Appendix
Ambient
temperature
10 to 40°C
{50 to 104°F}
5 to 45°C
{41 to 113°F}
10 to 40°C
{50 to 104°F}
10 to 40°C
{50 to 104°F}
132