Epson TM-H6000V Technical Reference Manual page 34

Setting up Using a SimpleAP Connection from a Windows Computer
Necessary Items
Prepare the following items.
 Computer for setting: Windows 10/8/7/Vista
Computer equipped with a wireless LAN function
 Utility for setting: Epson TM-H6000V Utility for Windows
Follow the steps below to connect the printer.
1
Turn on the printer.
After starting the printer, check that the "SimpleAP Start" is printed. If it is not printed, you need to
enable SimpleAP mode in interface settings mode.
2
Activate Windows Wireless Network Connection and select [EPSON_Printer] as the
connection device on the screen that appears.
If the window to enter a pass phrase appears, enter "12345678".
Default settings on printer are the following values.
Network mode
SSID
Pass phrase
IP Address
3
When connecting to the printer is complete, setup the Wireless LAN using the
network setup tool, Epson TM-H6000V Utility for Windows.
For details about Epson TM-H6000V Utility for Windows, see TM-H6000V Utility User's Manual.
4
When setting the wireless LAN is complete, remove the wired cable (LAN/USB) and
restart the printer.
SimpleAP mode
EPSON_Printer
12345678
192.168.192.168
Chapter 2 Setup
2
34