Related Manuals for Epson H6000II - TM Two-color Thermal Line
Summary of Contents for Epson H6000II - TM Two-color Thermal Line
- Page 1 TM-H6000II with Image Scanner User’s Manual / Bedienungsanleitung Gebruikershandleiding / Manuel d’utilisation Manual do utilizador / Manual del usuario Manuale dell’utente 401468100...
-
Page 2: Part Names
This TM-H6000II with Image Scanner printer combines slip, impact, and two-color thermal printing with the new image scanner function. The image scanner can digitize a check image, which offers you an efficient method of check processing. Part Names roll paper cover unit cover control... -
Page 3: Emc And Safety Standards Applied
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to... -
Page 4: Safety Precautions
Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire. Immediately unplug the equipment, and contact your dealer or a SEIKO EPSON service center for advice. Never attempt to repair this product yourself. Improper repair work can be dangerous. -
Page 5: Caution Labels
English Caution Labels WARNING: Do not connect a telephone line to the drawer kick-out connector or the display module connector; otherwise, the printer and the telephone line may be damaged. CAUTION: The thermal head and paper feed motor for the thermal section are hot. -
Page 6: Power Switch Cover
English Power Switch Cover You can use the enclosed power switch cover to make sure that the power switch is not accidentally pressed. Just press the cover into place to install it. WARNING: If an accident occurs when the power switch cover is attached, immediately unplug the power supply cable to avoid fire. -
Page 7: Installing The Ribbon
English Installing the Ribbon Use the EPSON ERC-32. The use of any ribbon cassettes other than those approved by EPSON may damage the printer and will void the warranty. 1. Turn on the printer. Turn the knob on the ribbon cassette. Open the front cover of the printer, and insert the new ribbon. -
Page 8: Troubleshooting
English Troubleshooting Error light on or blinking. The print head temperature may be extremely high. Wait until the print head cools and the printer resumes printing automatically. Make sure that the roll paper and unit cover are properly closed. Turn off the printer, and check for a paper jam. The autocutter may be jammed. - Page 9 With the scanning function, when a check is inserted into the printer, the check image is digitized and stored, which saves check processing time and cost. EPSON recommends the following sequence for single-pass processing. The single pass eliminates the need to turn the check paper over.
-
Page 10: Cleaning The Micr Mechanism
English • An extremely large variation in the density and color tone of the background of a check. • Many folds or wrinkles in a check. • Exposure of the image scanning part of the printer to strong sunlight. • A foreign object, such as sand, entering the printer and scratching the glass surface of the scanner. -
Page 11: Notes On Using The Micr Reader
If your printer has the optional endorsement printing mechanism, install the endorsement ribbon following the steps below: Use the EPSON ERC-41. The use of any ribbon cassettes other than those approved by EPSON may damage the printer and will void the warranty. -
Page 12: Cleaning The Scanner
English Note: Be sure to turn on the power before installing a ribbon cassette. 1. Turn the ribbon cassette knob. Then open the unit cover. 2. Inside the printer, push the levers backward to open the unit. Note: Do not open the unit during printing. 3. - Page 13 English Note: Do not use any liquid, such as alcohol, benzine, or water. glass part TM-H6000II Specifications Print method Receipt: Thermal line, 180 dpi 180 dpi Slip: 9-pin serial impact dot matrix Endorsement: 8-pin shuttle impact dot matrix (dpi: dots per inch [number of dots per 25.4 mm {1"}]) Print font Receipt: 12 24/9...
- Page 14 English TM-H6000II Specifications Ribbon life Slip: Purple: 6 million characters, Black: 4 million characters Endorsement: Purple: 1 million characters, Black: 800,000 characters Interface (compatible) RS-232/IEEE 1284 Bidirectional Parallel Data buffer Selectable for 45 bytes or 4 KB using DIP switch D.K.D.