Bluetooth Low Energy Technology Advertising; Introduction; Dongle Specifications; Procedure - Epson TM-H6000V Technical Reference Manual

Bluetooth Low Energy Technology Advertising

Introduction

When you connect the BT820 from Laird Tech to the USB A connector on the TM-H6000V and turn it on, the
Bluetooth low energy technology Advertising Packet is transmitted. By default, the TM-H6000V transmits the
packet according to the iBeacon Format from Apple. You can also change the data that is transmitted by
following the steps in
Glossary:
Bluetooth Low Energy Technology Advertising
Bluetooth Low Energy Technology Advertising
Packet
Bluetooth adapter
iBeacon

Dongle specifications

Manufacturer: Laird Tech
Model name: BT-820
For setting, use the Epson TM Utility for iOS.

Procedure

When turning on the TM-H6000V, the Bluetooth adapter connected to the USB Type A connector is enabled.
If you install the Bluetooth adapter after turning on the printer, this is not enabled.
Bluetooth Low Energy Technology Advertising Packet Format
In the TM-H6000V, the iBeacon format is used by default for the Bluetooth low energy technology Advertising
Packet.
The UUID for the TM-H6000V is "fac1ba2f-61a2-4d83-9a8c-60087c232569".
The user can edit the following specifications in the iBeacon format: UUID, Major number, Minor number, and
Measured Power.
"Changing the Bluetooth Low Energy Technology Advertising Packet" on page
Term Description
The name of this function.
The data sent by this function from the printer.
The BT820 from Laird Tech
A USB dongle to connect to the USB Type A connector.
The format stipulated by Apple for Bluetooth low energy
technology Advertising Packets
When using the default settings for the TM-H6000V (Bluetooth
adapter installed in the printer and the printer is on), the Bluetooth
low energy technology Advertising Packet is transmitted in
iBeacon format.
Appendix
147.
146