Controlling The Cash Drawer - Epson TM-H6000V Technical Reference Manual

Controlling the Cash Drawer

A pulse output is sent to drawer kick connector pin 2 or pin 5, and you can open the drawer.
You can also check the open/close status of the drawer by checking the signal level of the drawer kick connector
pin 3. These controls are executed by a driver or by commands.
ESC/POS Commands
Prepare the output command for the specified pulse and the status transmission command.
For detailed information about ESC/POS commands, see the Product Specifications. Product Specifications is
available after contracting the non-disclosure agreement with Epson. For details, please contact the selling
agency.
Windows Printer Drivers
You can set so that the drawer opens at the start/end of printing or start/end of a page. For details, see the
manual for drivers.
For details on control, see the manual for Status API of the driver.
OPOS (OCX Driver)
Register a cash drawer using the SetupPOS Utility, and control using the OpenDrawer method or the DirectIO
function.
For details, see the "EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE Cash Drawer"
and the "UnifiedPOS Specification".
OPOS for .NET
Register a cash drawer using the SetupPOS Utility, and control using the OpenDrawer method or the DirectIO
function.
For details, see the "EPSON OPOS ADK for .NET MANUAL Application Development Guide Cash Drawer
(EPSON Standard)" and the "UnifiedPOS Specification".
JavaPOS
Register a cash drawer using the SetupPOS Utility, and control using the OpenDrawer method or the DirectIO
function.
For details, see the "EPSON JavaPOS ADK MANUAL Application Development Guide Cash Drawer (EPSON
Standard)" and the "UnifiedPOS Specification".
Epson ePOS SDK
The output command for the drawer kick pulse and the status transmission command are provided in each
SDK library. For details, see the user's manuals provided with each SDK.
 Whether or not pin 2 or pin 5 operates the drawer kick connector depends on the connected cash
 You can acquire documents regarding the UnifiedPOS from the following link.
Server Direct Print
Prepare the output command for the specified pulse and the status transmission command.
For details, see the "Server Direct Print User's Manual".
drawer.
https://nrf.com/resources/retail-technology-standards/unifiedpos
Chapter 4 Application Development Information
4
87