To Disassemble And Assemble The Cover; Figure 5-2 To Disassemble And Assemble The Cover - Rigol DS1074B Service Manual

RIGOL

To Disassemble and Assemble the Cover

Figure 5-2 To Disassemble and Assemble the Cover

Part Explanations:
① 2 screws (M3*12 pan head torx pointed self-tapping screw) at the bottom of the
cover.
② 2 screws ((small nailhead) M3*10 pan head torx machine screw) at the handle
groove.
Disassemble steps:
1. Remove the 4 screws (① and ②) using the screwdriver (T10).
2. Remove the cover gently.
Assemble steps:
The assemble steps are the reverse of the disassemble steps. The same goes for the
introductions below.
5-4
Handle
Chapter 5 Disassemble and Assemble
②
①
②
Cover
Foot Mat
DS1000B Service Guide
①