General Care And Cleaning - Rigol DS1074B Service Manual

RIGOL
calibration report that meets the national standards.
(2) Measurement level calibration plan: check and calibrate the instrument
according to the product pre-delivery standard of RIGOL; while at the same
time, perform measurements on the product by national level 1
measurement organization and provide calibration report that meets the
national standards and is traceable to the national measurement standard
(NMS).
Service Code
CPC3
CPV3

General Care and Cleaning

General Care
Do not store or leave the instrument where it may be exposed to direct sunlight for
long periods of time.
Cleaning
Clean the instrument regularly according to its operating conditions. To clean the
exterior surface, perform the following steps:
1. Disconnect the instrument from all power sources.
2. Clean the loose dust on the outside of the instrument with a lint-free cloth (with a
mild detergent or water). When cleaning the LCD, take care to avoid scarifying it.
CAUTION
To avoid damage to the instrument, do not expose it to caustic liquids.
WARNING
To avoid injury resulting from short circuit, make sure the instrument is
completely dry before reconnecting to a power source.
8-4
Service Period
3 years
3 years
Chapter 8 Service&Support
Explanation
Enjoy company level calibration
service according to the
recommended calibration period of
RIGOL since the date of perchase
Enjoy measurement level calibration
service according to the
recommended calibration period of
RIGOL since the date of perchase
DS1000B Service Guide