To Disassemble And Assemble The Main Board; Figure 5-8 To Disassemble And Assemble The Main Board - Rigol DS1074B Service Manual

Chapter 5 Disassemble and Assemble

To Disassemble and Assemble the Main Board

Ground Finger
⑮
⑮

Figure 5-8 To Disassemble and Assemble the Main Board

Part Explanations:
⑭ 6 screws (M3*6 pan head torx composite machine screw with plain washer) fixing
the main board.
⑮ 5 nuts (BNC nut) at the BNC terminals.
Disassemble steps:
1. Remove the 6 screws (⑭) fixing the main board using the screwdriver (T10).
2. Remove the 5 nits (⑮) at the BNC terminals using BNC socket.
3. Disconnect the ground finger on the metal chassis and the ground terminal of the
main board using an electric soldering iron.
4. Remove the main board gently.
DS1000B Sevice Guide
⑮
⑮
⑮
⑭
⑭
⑭
RIGOL
⑭
⑭
⑭
5-11