To Disassemble And Assemble The Interface Board And Fan; Figure 5-5 To Disassemble And Assemble The Interface Board And Fan - Rigol DS1074B Service Manual

RIGOL
To Disassemble and Assemble the Interface
Board and Fan
⑦
⑦
⑦
Fan

Figure 5-5 To Disassemble and Assemble the Interface Board and Fan

Part Explanations:
⑦ 4 screws (M5*10 countersunk head torx cutting self-tapping screw) fixing the fan.
⑧ 4 screws (M3*6 pan head torx composite machine screw with plain washer) fixing
the interface board.
Disassemble steps:
1. Remove the fan cable from the corresponding port.
2. Remove the 4 screws (⑦) fixing the fan using the screwdriver (T10). Then,
remove the fan.
3. Remove the interface board cable connected to the main board.
4. Remove the 4 screws (⑧) fixing the interface board using the screwdriver (T10).
Then, remove the interface board.
5-8
⑦
Chapter 5 Disassemble and Assemble
⑧
⑧
⑧
⑧
Interface Board
DS1000B Service Guide