Smart Settings; F71869 Super Io Configuration - Lex Computech CI770C User Manual

4-7-6 SMART Settings

Main Advanced
Smart Settings
Smart Self Test
SMART Self Test
Run Smart Self Test on all HDDs during POST.
The optional settings are: Disabled, Enabled.
4-7-7 F71869 Super IO Confi guration
Main Advanced
F71869 Super IO Confi guration
F71869 Super IO Chip
►Serial Port 1 Confi guration
►Serial Port 2 Confi guration
Power Failure
Serial Port 1 Confi guration
Please refer section 4-7-7-1
Serial Port 2 Confi guration
Please refer section 4-7-7-1
Power Failure
This item specifi es whether your system will reboot after a power failure or interrupt occurs.
[Keep last state] Restores the system to the status before power failure or interrupt occurred.
[Bypass mode] Restores the system to the bypass mode.
[Always on] Leaves the computer in the power on state.
[Always off] Leaves the computer in the power off state.
Chipset Boot
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Chipset
Boot
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Save & Exit
Security
[Disabled]
Security Save & Exit
F71869
[Keep last state]
62
Run SMART Self Test on
all HDDs during POST.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
Esc: Exit
Set Parameters of Serial
Port 0(COMA)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
Esc: Exit