1. Manuals
  2. Brands
  3. Lex Computech Manuals
  4. Motherboard
  5. 2I385HW
  6. Manual

Lex Computech 2I385HW Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
2I385HW
Intel Bay Trail-I E3815 / E3845
(Single Core / Quad Core )CPU,
DDR3L 1066 / 1333 MT/s,
2 x LAN / LVDS / Touch Screen / USB / COM
All-In-One
Intel Bay Trail-I E3815/E3845
(Single Core 1.46 GHz / Quad Core 1.91 GHZ )CPU,
2 x Intel GbE LAN , 2 x PCIe mini card slots ,
VGA, Audio, SATA, USB, COM , LVDS, Touch Screen
NO. 2I385HW_V0.4
Release date: JUN. 30. 2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2I385HW and is the answer not in the manual?

Questions and answers

Related Manuals for Lex Computech 2I385HW

Summary of Contents for Lex Computech 2I385HW

  • Page 1 2I385HW Intel Bay Trail-I E3815 / E3845 (Single Core / Quad Core )CPU, DDR3L 1066 / 1333 MT/s, 2 x LAN / LVDS / Touch Screen / USB / COM All-In-One Intel Bay Trail-I E3815/E3845 (Single Core 1.46 GHz / Quad Core 1.91 GHZ )CPU,...

  • Page 2: Table Of Contents

    CHAPTER 2 HARDWARE INSTALLATION ..............2-1 UNPACKING PRECAUTION ..................2-2 UNPACKING CHECKUP ....................2-3 DIMENSION-2I385HW ....................2-4 LAYOUT-2I385HW-CONNECTOR AND JUMPER ............2-4-1 LAYOUT-2I385HW-CONNECTOR AND JUMPER BOTTOM ........2-4-2 LAYOUT-2I385HW-FUNCTION MAP ............... 2-4-3 LAYOUT-2I385HW-FUNCTION MAP BOTTOM ............2-5 DIAGRAM-2I385HW ....................2-5-1 BOTTOM SIDE DIAGRAM-2I385HW ...............
  • Page 3 3-17 USB INTERFACE ....................... 3-18 SATA INTERFACE ..................... 3-19 PS2 KEYBOARD/MOUSE..................3-20 PCI EXPRESS MINI CARD..................3-21 eDP INTERFACE ....................... 3-22 CONNEXTOR WAFER OF COMPATIBLE BRAND AND PART NUMBER LIST ..CHAPTER 4 INTRODUCTION OF BIOS ................ 4-1 ENTER SETUP ......................4-2 BIOS MENU SCREEN &...
  • Page 4 5-8 HOW TO UPDATE INSYDE BIOS ................APPENDIX A: POWER CONSUMPTION TEST ..............APPENDIX B: RESOLUTION LIST ..................APPENDIX C: F75111N I C DIO DEVICE ................1-1 IO DEVICE : F75111 UNDER DOS ................1-2 IO DEVICE : F75111 UNDER WINDOWS ..............1-3 IO DEVICE : F75111 VB6 UNDER WINDOWS ............
  • Page 5 Copyright This manual is copyrighted and all rights are reserved. It does not allow any non authorization in copied, photocopied, translated or reproduced to any electronic or machine readable form in whole or in part without prior written consent from the manufacturer.

  • Page 6: Warning

    Warning ! Battery Batteries on board are consumables. The life time of them are not guaranteed. 2. Fless solution with HDD The specifi cation & limitation of HDD should be considered carefully when the fanless solution is implemented. We will not give further notifi cation in case of changes of product information and manual.

  • Page 7: Hardware Notice Guide

    Hardware Notice Guide 1. Before linking power supply with the motherboard, please attach DC-in adapter to the motherboard fi rst. Then plug the adapter power to AC outlet. Always shut down the computer normally before you move the system unit or remove the power supply from the motherboard.
  • Page 8 Photo 1 Insert Unplug...

  • Page 9: Chapter 1 General Information

    BayTrail-I Integrated Graphics chipset. This integrated BayTrail-I platform offers superb performance and PC specification in the industry. Despite the limited space of 2I385HW, it supports four COM ports and fi ve ports of USB 2.0 to enhance the host controller interface which will ensure the high performance level and flexible expansion.

  • Page 10: Major Feature

    1-1 Major Feature Intel BayTrail-I E3815 1.46GHz Single core / E3845 1.91GHz Quad core SOC Intel BayTrail-I Integrated Graphics chipset, E3815 400 MHz / E3845 542 MHz render clock frequency On board DDR3L SDRAM 2GB / 4GB Memory, data transfer rate of 1066MT/s / 1333MT/s Support 2 x 10/100/1000 Mbps Intel LAN ports Support extended 2 x Mini PCIe card (full size &...

  • Page 11: Specification

    1-2 Specifi cation SOC: Intel BayTrail-I E3815 1.46GHz / E3845 1.91GHz (Single / Quad core) Memory: DDR3L SDRAM 2GB / 4GB Memory, data transfer rate of 1066MT/s / 1333MT/s Graphics: Intel BayTrail-I Integrated Graphics chipset, E3815 400 MHz / E3845 542 MHz render clock frequency SATA: One SATA connector with independent DMA operation supported LAN: LAN: 2 x INTEL I211-AT / I210-IT (option) PCIE LAN of 10 / 100 / 1000 Mbps Serial Port: 4 x COM ports ( 1 x RS232/422/485 + 3 x RS232/485)

  • Page 12: Installing The Mini Pci-E Card

    1-3 Installing the Mini PCI-e Card 2. Install a mSATA card at the angle of 45°. 1. Unfasten the round-headed M2*6 (The half size Mini PCI-e slot supports mSATA) screw for half size Mini PCI-e. 3. Fasten a round-headed M2*6 screw.

  • Page 13: Directions For Installing The Mini Card

    1-4 Directions for installing the Mini Card 1. Unscrew the screw on the board 2. Plug in the Mini Card in a 45 angle 3. Gently push down the Mini Card and screw the screw back.

  • Page 14: Packing List

    1-5 Packing List Material Code Description Detail Specifi cation Quantit 7G1901-1530001-0 MB-2I385HW-I44-001 LF,2I385HW-I44,Rev.:001 7G1901-1531001-0 MB-2I385HW-I12-001 LF,2I385HW-I12,Rev.:001 6G8006-2347-0100 LEX Product Driver DVD LF, Intel Baytrail Driver 6G8001-2192-0400 Manual LF,M/B,2I385HW 6G6003-7330-0100 Power Cable LF,L=9cm,2.0 1*4/DC JK 6G5212-0301-0300 30W Power Adapter,12V/2.5A LF,L Type,EA10301-M06,EDAC *The packing list above is for the users who purchase single motherboard.

  • Page 15: Chapter 2 Hardware Installation

    Chapter-2 Hardware Installation 2-1 Unpacking Precaution This chapter provides the information how to install the hardware of 2I385HW. Please follow section 1-5, 2-1 and 2-2 to check the delivery package and unpack carefully. Please follow the jumper setting procedure. NOTE! 1.

  • Page 16: Unpacking Checkup

    2-2 Unpacking checkup First of all, please follow all necessary steps of section 2-1 to protect 2I385HW from electricity discharge. With reference to section 1-5 please check the delivery package again with following steps: 1. Unpack the 2I385HW board and keep all packing material, manual and driver disc etc, do not dispose ! 2.

  • Page 17: Dimension-2I385Hw

    2-3 Dimension-2I385HW...

  • Page 18: Layout-2I385Hw-Connector And Jumper

    2-4 Layout-2I385HW-Connector and Jumper CPI1 & CPI2 CPI2 Share with CPI1 LVDS1 CPO1 JVL1 EDP1 JVL2 CPP1 JSB1 CL11 CKM1 CFP1 CL21 CIO1 MPCE1 CALR1 MPCE2 CBT1...

  • Page 19: Layout-2I385Hw-Connector And Jumper Bottom

    2-4-1 Layout-2I385HW-Connector and Jumper Bottom SATA1...

  • Page 20: Layout-2I385Hw-Function Map

    2-4-2 Layout-2I385HW-Function MAP VIN Typical +12V WV for 9V~36V Voutage Output +12V/+5V LVDS 18/24bits Panel Power PCIe mini card express socket For LVDS PCIe / mSATA auto-detec USB / I C eDP 2Lanes Panel Power Line-In/Mic-Out/Line-Out For eDP Backlight Power...

  • Page 21: Layout-2I385Hw-Function Map Bottom

    2-4-3 Layout-2I385HW-Function MAP Bottom SATA...

  • Page 22: Diagram-2I385Hw

    2-5 Diagram- 2I385HW CPI1 & CPI2 CPI2 Share with CPI1 LVDS1 CPO1 JVL1 EDP1 JVL2 CPP1 JSB1 CL11 CKM1 CFP1 CL21 CIO1 MPCE1 CALR1 MPCE2 CBT1...

  • Page 23: Bottom Side Diagram-2I385Hw

    2-5-1 Bottom Side Diagram- 2I385HW SATA1...

  • Page 24: List Of Jumpers

    2-6 List of Jumpers JSB1: CMOS DATA Clear JVL1 : LVDS panel power select JVL2 : eDP panel power select 2-7 Jumper Setting Description A jumper is ON as a closed circuit with a plastic cap covering two pins. A jumper is OFF as an open circuit without the plastic cap.
  • Page 25 JSB1: CMOS Data Clear A battery must be used to retain the motherboard confi guration in CMOS RAM. Close Pin1 and pin 2 of JSB1 to store the CMOS data. To clear the CMOS,follow the procedures below: 1. Turn off the system and unplug teh AC power 2.

  • Page 26: Jvl1: Lcd Panel Power Select

    2-8 JVL1: LCD panel power select JVL1 Description *2-3 +3.3V Note: Attention! Check Device Power in spec. JVL1 *+3.3V 2-9 JVL2: eDP panel power select JVL2 Description *2-3 +3.3V Note: Attention! Check Device Power in spec. JVL2 *+3.3V...

  • Page 27: Chapter 3 Connection

    Chapter-3 Connection This chapter provides all necessary information of the peripheral's connections, switches and indicators. Always power off the board before you install the peripherals. 3-1 List of Connectors BAT1: Li 3V battery holder CA3: Line-out/Line-in/Mic-in/SPDIF-out 2x5 pin (2.0mm) Wafer CALR1: Amplifi...
  • Page 28 eDP1: eDP 2x10 pin (1.25mm) connector LVDS1: LVDS 2x15 pin (1.25mm) connector SATA1: One SATA connector 7pin MPCE1: Full size mini card port 1 sockets 52pin MPCE2: Half size mini card port 2 sockets 52pin...

  • Page 29: Dc Power Input

    3-2 DC Power Input CPI1: DC -in 1x4 (2.0mm)Wafer Internal connector (Red) PIN NO. Description CPI1 DC-IN (12V) Note: Very important check DC-in Voltage pin1 CPI12: DC -in 2x4 (2.0mm)Wafer Internal connector PIN NO. Description 3,4,5,6 DC-IN (12V) 1,2,7,8 Note: Very important check DC-in Voltage 3-3 CMOS Battery connector BAT1: 3V Battery hold 2pin BAT1: Battery use Li 3V / 40mAh (CR1220)

  • Page 30: External Battery Cell Power-In

    3-4 External Battery Cell Power-in CBT1: External Battery 1x2pin (1.25mm) wafer PIN NO. DESCRIPTION CBAT1 pin1...

  • Page 31: Dc+12V/+5V Voltge Power Output (4Pin 2.0Mm Wafer) (Black)

    3-5 DC+12V /+5 Voltge Power output (4pin 2.0mm Wafer)(Black) CPO1: +12V/+5V DC voltage output PIN NO. Description +12V* * Note: Attention! Check Device Power in spec CFP1 pin1 CPO1 pin1 3-6 Front Panel Pin Header CFP1 Front Panel connector 2x5pin (2.0mm) wafer PIN NO.

  • Page 32: Lvds Connector

    3-7 LVDS Connector LVDS1: LVDS interface (2x15pin 1.25mm wafer) PIN NO. Description PIN NO. Description PWM dimming +LCD(5V or 3.3V) +LCD(5V or 3.3V) Channel-1-DATA3+ Channel-0-DATA3+ Channel-1-DATA3- Channel-0-DATA3- Channel-0-DATA2+ Channel-0-CLK+ Channel-0-DATA2- Channel-0-CLK- Channel-0-DATA1+ Channel-0-DATA0+ Channel-0-DATA1- Channel-0-DATA0- +LCD(5V or 3.3V) +LCD(5V or 3.3V) LVDS1 Channel-1-DATA2+ Channel-1-CLK+...

  • Page 33: Touch Screen Device

    3-9 Touch screen device CT1: Touch screen (2x5 pin 2.0mm wafer) COM interface For 8- wire type pin defi ne PIN NO. Description PIN NO. Description Bottom Bottom Sense Top Sense Right Right Sense Left Left Sense Note: For eight wire type cable Pin 3 and Pin4 need short. For 4- wire type pin defi...

  • Page 34: Audio Interface

    3-10 Audio interface CA3: Line-out/Line-in/Mic-in/SPDIF-out 2x5 pin (2.0mm) Wafer PIN NO. Description PIN NO. Description Line-out-R MIC-IN Line-in-R SPDIF-OUT Line-in-L Line-out-L MIC-IN 3-11 Audio Amplifi er CALR1: Amplifi er Line-out Right/Left channel 4pin (1.25mm) wafer PIN NO. Description Left+ Left- Right- Right+ pin1...

  • Page 35: Com Interface

    3-12 COM interface CC1/2/3/4 COM1/2/3/4 2x5pin (2.0mm) wafer (RS232 Mode) PIN NO. Description PIN NO. Description Note: 1. COM1/4 pin9 can be set as +12V or +5V. this setting is OEM. CC1/2/3/4 COM2/3/4 2x5pin (2.0mm) wafer (RS485 Mode) PIN NO. Description PIN NO.

  • Page 36: Vga Display Interface

    3-13 VGA Display interface CG1: VGA 2x5pin (2.0mm) wafer PIN NO. Description PIN NO. Description BLUE DDC CLOCK GREEN V-SYNC H-SYNC DDC DATA pin1 CIO1 pin1 3-14 Digital Input / Output CIO1 DIO 0—3 (2x5pin 2.0mm wafer) PIN NO. Description PIN NO.

  • Page 37: I 2 C Bus Interface

    WDT For F75111N I C watch dog timer device: DC spec : Input low Voltage (VIL):+0.8 Max , Input High Voltage(VIH) : +2V Min Output low Current (IOL):10mA (Min) VOL=0.4V Output High Current (IOH):-10mA (Min) VOH=2.4V Watch Dog Time value 0~255 sec The system will be issued reset.

  • Page 38: Lan Interface

    3-16 LAN Interface CL1/CL2 : LAN port Giga /100Mb 2x4pin (2.0mm) wafer PIN NO. Description PIN NO. Description TR0-/TX- TR1-/RX+ TR0+/TX+ TR2-/NC- TR2+/NC TR3-/NC TR1+/RX- TR3+/NC CL11/CL21: LAN1 LED indicator ( 1x4pin 1.25mm wafer) PIN NO. Description Speed 10M Speed 100M Speed 1000M RJ45 LAN Connector--- LED defi...

  • Page 39: Usb Interface

    3-17 USB Interface CU1/CU2/CU3/CU4/CU6: USB2.0 port (1x4pin 1.25mm Wafer) PIN NO. Description DATA - DATA + Note: 1. CU6 Signal share with Touch if Touch upstream use USB interface. CU5 USB3.0 port (1x5pin 1.25mm Wafer) PIN NO. Description Data TX + Data TX - Data RX + Data RX -...

  • Page 40: Sata Interface

    3-18 SATA Interface SATA1: SATA Port 1x7pin connector PIN NO. Description SATA1 Note: 1. SATA1 support SATA 2.0 spec update 3Gb/sec. 2. CPO1 provide SATA HDD power +12V, GND, +5V 3. if SATA device use on SATA1, the MPCE1 should not use mSATA interface. 3-19 PS2 Keyboard/Mouse CKM1: KB/MS port 1x6pin (1.25mm) Wafer PIN NO.

  • Page 41: Pci Express Mini Card

    3-20 PCI Express Mini card MPCE1/MPCE2: Support USB and PCIe by one Interface (Mini card socket 52pin) MPCE1 : Full size mini card MPCE2 : Half size mini card PIN NO. Description PIN NO. Description +3.3V +1.5V PCIe-CLK- PCIe-CLK+ Reset PCIe-RX-/mSATA-RX+ +3.3V MPCE1...

  • Page 42: Edp Interface

    3-21 eDP interface eDP1: eDP interface (2x10 pin 1.25mm wafer) PIN NO. Description PIN NO. Description Lane-0-DATA- +12V or +5V Lane-0-DATA+ +12V or +5V Lane-1-DATA- Lane-1-DATA+ Backlight Enable PWM dimming for eDP I C Data +LCD(5V or 3.3V) I C Clock +LCD(5V or 3.3V) eDP Aux+ +LCD(5V or 3.3V)

  • Page 43: Connextor Wafer Of Compatible Brand And Part Number List

    3-22 Connector wafer of Compatible Brand and part number list Location CKTS PITCH Brand Name Mating connector Cable housing 2x5 10Pin 2.0mm B10B-PHDSS PHDR-10VS CALR1 1x4 4Pin 1.25mm MOLEX 53047-0410 51021-0400 2x5 10Pin 2.0mm B10B-PHDSS PHDR-10VS 2x5 10Pin 2.0mm B10B-PHDSS PHDR-10VS 2x5 10Pin 2.0mm...

  • Page 44: Introduction Of Bios

    Chapter-4 Introduction of BIOS The BIOS is a program located in the Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gains control. The BIOS fi rst operates an auto-diagnostic test called POST (Power on Self Test) for all the necessary hardware, it detects the entire hardware devices and confi...

  • Page 45: Bios Menu Screen & Function Keys

    4-2 BIOS Menu Screen & Function Keys In the above BIOS Setup main menu of, you can see several options. We will explain these options step by step in the following pages of this chapter, but let us fi rst see a short description of the function keys you may use here: Press ←→...

  • Page 46: Getting Help

    4-3 Getting Help Status Page Setup Menu/ Option Page Setup Menu Press F1 to pop up a help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window, press <Esc>.

  • Page 47: Menu Bars

    4-4 Menu Bars There are six menu bars on top of BIOS screen: Main To change system basic confi guration Advanced To change system advanced confi guration Security Password settings Power PME & Power button settings Boot Exit Save setting, loading and exit options. User can press the right or left arrow key on the keyboard to switch from menu bar.

  • Page 48: Advanced

    System Time Set the Time. Please use [Tab] to switch between data elements. 4-6 Advanced Boot Confi guration Please refer section 4-6-1 PCI Express Confi guration Please refer section 4-6-2 Video Confi guration Please refer section 4-6-3 Thermal Confi guration Please refer section 4-6-4 SATA Confi...

  • Page 49: Boot Configuration

    ACPI Table/Features Control Please refer section 4-6-7 4-6-1 Boot Confi guration Numlock Select Power-on state for Numlock, default is <ON> 4-6-2 PCI Express Confi guration PCIe 1/2/3/4 confi guration settings...

  • Page 50: Pci Express Root Port 1/2/3/4

    4-6-2-1 ► PCI Express Root Port 1/2/3/4 Control the PCI Express Root Port. The optional settings are: Enabled(default), Disabled. Select PCI Express port speed. The optional settings are: Gen1(default), Gen2 Select PCIE TXE ROM support The optional settings are: Disabled(default), Enabled...

  • Page 51: Video Configuration

    4-6-3 Video Confi guration Display Panel type Select panel type on the M/B, the value are below: LVDS (default), eDP. Dimming Frequency Select panel frequency for dimming to control backlight. Please refer panel spec to select valid frequency <200Hz>(Default), <275 Hz>, <380 Hz>, <20K Hz>, <25K Hz>, <100 Hz> Dimming Invert Please confi...

  • Page 52: Aperture Size

    Dimming Ratio Change panel brightness it have 10 stage, every stage is 10% from 10% to 100% to increase progressively. Dimming Save Mode Disable: When Power off dimming will restore to 100%(default) Enable: When Power off dimming will not restore to 100% Confi...

  • Page 53: Thermal Configuration

    4-6-4 Thermal Confi guration Thermal Confi guration Parameters This Value controls the temperature of the ACPI Critical Trip Point, the point in which the OS will shutdown the system. Critical Trip point is the shutdown temperature, the default value is 110˚ The CPU frequency will auto reduce when cpu temperature arrived to passive Trip point.

  • Page 54: Sata Configuration

    4-6-5 SATA Confi guration SATA Controller Use this item to Enable or Disable SATA Device. The optional settings are: Enabled(default) or Disabled Chipset SATA Mode Determine how SATA controller(s) operate. The optional settings are: IDE Mode(default), AHCI Mode. SATA Speed Indicates the maximum speed the SATA controller can support.

  • Page 55: Console Redirection

    SATA Port 1 Connected to an ODD Use this item to Enable or Disable SATA Port1 ODD function The optional settings are: Enabled(default) or Disable 4-6-6Console Redirection Console Serial Redirect Use this item to enable or disable Console Redirection. The optional settings are: Enabled, Disabled(default). Text Mode Resolution The optional settings are: Force 80x25 Force 80x24(DEL FIRST ROW)

  • Page 56: Acpi Table/Features Control

    Parity The optional settings are: None(default) , Even , Odd Stop Bits The optional settings are: 1 Bit(default) , 2 Bits Flow Control The optional settings are: None(default) , RTS/CTS , XON/XOFF 4-6-7 ACPI Table/Features Control ACPI Table/Features Control Select ACPI sleep state the system will enter when the SUSPEND button is pressed. The optional settings: DSDT - ACPI S3 (Suspend to RAM), Enabled or Disabled(default)

  • Page 57: Security

    4-7 Security Supervisor Password To set up an Supervisor password 1. Select Supervisor Password. The screen then pops up an Create New Password dialog. 2. Enter your desired password that is no less than 3 characters and no more than 10 characters. 3.

  • Page 58: Power

    4-8 Power Wake on LAN Determines the action taken when the system power is off and the PCI power management Enable wake up event occurs. The optional settings: Enabled, Disabled(default) Power Button Instant OFF(default) : The system will be turn off directly when push the power button. Delay 4 sec : The system will be turn off when push the power button for 4 sec.

  • Page 59: Boot

    4-9 Boot Boot type Select boot type for Dual type ,Legacy boot type or UEFI boot type, default is Dual boot type Quiet Boot The optional settings are: Enabled(default), Disabled. EFI / Legacy Device order Determine EFI device fi rst or legacy device fi rst. The optional settings: EFI device fi...

  • Page 60: Legacy

    4-9-1 Legacy Normal Boot Menu Select Normal Boot option priority or Advance Boot option priority. The optional settings: Normal(default), Advance 4-9-2 Boot Type Order...

  • Page 61: Exit

    Boot Type Order Setting the boot type priority. The default settings is 1.USB drive 2.Hard Disk Drive 3.CD/DVD ROM drive 4.Others 4-10 EXIT Exit Saving Changes This item allows user to reset the system after saving the changes. Save Change Without Exit This item allows user to saving the changes but doesn’t restart.

  • Page 62: Device Manaager

    4-11 Device Manager Please press the key F10 when boot up to go into the Device Manager menu Serial Port 1/2 Confi guration Please refer section 4-11-1 Serial Port 3/4/5/6 Confi guration Please refer section 4-11-2...

  • Page 63: Sio Fintek81801U

    4-11-1 SIO FINTEK81801U Serial Port 1/2 Use this item to enable or disable serial port (COM1 or COM2). The optional settings are: Enabled(default), Disabled. Serial Port 1 Base IO Address / Interrupt / Serial Mode Use this item to select an optimal setting for super IO device. The optional settings are: IO=3F8h;...

  • Page 64: Power Failure

    Serial Port 2 Base IO Address / Interrupt / Serial Mode Use this item to select an optimal setting for super IO device. The optional settings are: IO=2F8h; IRQ=3(default) IO=2E8h; IRQ=3,4 IO=3E8h; IRQ=3,4 IO=3F8h; IRQ=3,4 Serial Mode RS232 driver(default) : When hardware select to RS232 or RS422 mode, please enter to RS232 driver.

  • Page 65: Hardware Monitor

    4-11-2 Hardware Monitor Press [Enter] to view PC health status. This section shows the status of your CPU, Fan, and overall system. This is only available when there is Hardware Monitor function onboard.

  • Page 66: Sio Fintek81216D/Dg

    4-11-3 SIO FINTEK81216D/DG Serial Port 3/4 Use this item to enable or disable serial port (COM3, COM4, COM6 for Touch). The optional settings are: Enabled(default), Disabled.
  • Page 67 Serial Port 3 Base IO Address / Interrupt Use this item to select an optimal setting for super IO device. The optional settings are: IO=3E8h; IRQ=10 (default) IO=2F8h; IRQ=3,4,5,6,7,10,11 IO=2E8h; IRQ=3,4,5,6,7,10,11 IO=3F8h; IRQ=3,4,5,6,7,10,11 IO=4F8h; IRQ=3,4,5,6,7,10,11 IO=4E8h; IRQ=3,4,5,6,7,10,11 Serial Port 4 Base IO Address / Interrupt Use this item to select an optimal setting for super IO device.

  • Page 68: Chapter 5 Driver Installation

    Chapter-5 DRIVER INSTALLATION There is a system installation DVD in the package. This DVD does not only include all the drivers you need but also some other free application programs and utility programs. In addition, this DVD also includes an auto detect software telling you which hardware is installed and which driver is needed so that your system can function properly.
  • Page 69 AUTOMATIC DRIVER INSTALLATION menu...
  • Page 70 1. INF Install Intel Baytrail chipset driver 2. VGA Install onboard VGA driver 3. Serial IO Install Serial IO driver (FOR Win 7 only) 4. xHCI Install Intel USB 3.0 xHCI driver (FOR Win 7 only) 5. HD Audio Install HD Audio Codec driver 6.

  • Page 71: Inf Install Intel Baytrail Chipset Driver (Example For Win8 64Bit)

    5-1 INF Install Intel Baytrail Chipset Driver (example for WIN8 64bit) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Intel® Chipset Device Software" menu" screen, click "INF". screen, click "Next". 3. At the "License Agreement" 4. At the "Readme File Information" screen, screen,click "Yes"...
  • Page 72 5. Click "Next" 6. Click "Finish" & restart computer. NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 64/32-bit, X:\driver\INTEL\BAY\INF\WIN7\infi nst_autol.exe For Windows 8 / 8.1 32/64-bit X:\driver\INTEL\BAY\INF\WIN_8_64\infi nst_autol.exe...

  • Page 73: Vga Install Intel Baytrail Vga Driver (Example For Win8 64Bit)

    5-2 VGA Install Intel Baytrail VGA Driver (example for WIN8 64bit) 1. At the"AUTOMATIC DRIVER INSTALLATION 2. At the "Welcome to the Setup Program menu"screen, click "VGA". screen, Click "Next". 3. At the "License Agreement” screen, 4. At the "Readme File Information” screen, Click "Yes"...
  • Page 74 6. Click "Finish" to restart computer 5. At the "Setup Progress" screen, Click "Next". NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32-bit, X:\driver\INTEL\BAY\VGA\WIN_7_32\Setup.exe For Windows 7 64-bit X:\driver\INTEL\BAY\VGA\WIN_7_64\Setup.exe For Windows 8 / Windows 8.1 32-bit X:\ \driver\INTEL\BAY\VGA\WIN_8_32\Setup.exe For Windows 8 / Windows 8.1 64-bit X:\driver\INTEL\BAY\VGA\WIN_8_64\Setup.exe...

  • Page 75: Serial Io Install Driver Baytrail Serial Io Driver (For Windows 7 Only)

    5-3 Serial IO Install Driver Baytrail Serial IO Driver (FOR Windows 7 only) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Welcome to the Setup menu" screen, click "Serial IO". Programscreen, Click "Next". 3. At the "License Agreement" screen, 4.
  • Page 76 5. At the "Ready to install the program" screen, 6. Click "Finish" and restart computer Click "Install" NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32-bit, X:\driver\INTEL\BAY\SERIALIO\WIN7_32Bit.msi For Windows 7 64-bit X:\driver\INTEL\BAY\SERIALIO\Win7_64Bit.msi...

  • Page 77: Xhci Install Intel Usb 3.0 Xhci Driver (For Windows 7 Only)

    5-4 xHCI Install Intel USB 3.0 xHCI Driver (FOR Windows 7 only) 1. At the"AUTOMATIC DRIVER INSTALLATION 2. At the "Welcome to the Setup menu" screen, click " xHCI". Programscreen, Click "Next". 3. At the "License Agreement" screen, 4. At the "Readme File Information" screen, Click "Yes".
  • Page 78 6. Click "Finish" to restart computer 5. At the "Setup Progress" screen, Click "Next". NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32 / 64-bit, X:\driver\INTEL\BAY\XHCI\Driver_Installer\Setup.exe...

  • Page 79: Hd Audio Install High Definition Audio Driver

    5-5 HD Audio Install High Defi nition Audio Driver (example for WIN8 64bit) 1. At the "AUTOMATIC DRIVER 2. Click "Next". INSTALLATION menu", click "HD Audio" 3. Click "Finish" to restart computer NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32 / 64-bit, Windows 8/8.1 32 / 64-bit X:\driver\INTEL\BAY\SOUND\Win7_Win8_Win81_R273.exe...

  • Page 80: Mbi Install Intel Mbi Driver (For Win 8/8.1 Only)

    5-6 MBI Install Intel MBI Driver (FOR Win 8/8.1 only) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Welcome to the Setup Program menu", click "HD Audio" screen, Click "Next". 3. At the "License Agreement" screen, 4. At the "Setup Progress" screen, Click "Yes".
  • Page 81 5. Click "Finish" to restart computer NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 8/8.1 32 / 64-bit, X:\driver\INTEL\BAY\MBI\Setup.exe...

  • Page 82: Txe Install Intel Txe Driver

    5-7 TXE Install Intel TXE driver 5-7-1 TXE Install for WIN8/WIN8.1 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Setup" screen, Click "Next". menu", click "TXE" 3. At the "License Agreement" screen, 4. Click "Next". Click "Yes".
  • Page 83 5. Click "Finish" & restart computer NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 8 32 / 64-bit, X:\driver\INTEL\BAY\TXE\WIN_8\SetupTXE.exe For Windows 8.1 32 / 64-bit, X:\driver\INTEL\BAY\TXE\WIN_8.1\SetupTXE.exe...

  • Page 84: Txe Install For Win7

    5-7-2 TXE Install for WIN7 Please install PXE Patch fi rst. 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Windows Update" screen, menu", click "TXE Patch " Click "Yes". 3. Click "Finish" & restart computer 4. At the "AUTOMATIC DRIVER INSTALLATION menu", click "TXE "...
  • Page 85 5. At the "TXE Setup" screen, Click "Next". 6. At the "License Agreement" screen, Click "Yes". 8. Click "Finish" & restart computer 7. Click "Next". NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32 / 64-bit, TXE Patch X:\driver\INTEL\BAY\TXE\WIN_7\kmdf-1.11-Win-6.1-x86.msu X:\driver\INTEL\BAY\TXE\WIN_7\kmdf-1.11-Win-6.1-x64.msu...

  • Page 86: How To Update Insyde Bios

    5-8 How to update Insyde BIOS Under DOS Mode STEP 1. Prepare a bootable disc. (Storage device could be USB FDD or USB pen drive.) STEP 2. Copy utility program to your bootable disc. You may download it from our website. STEP 3.

  • Page 87: Appendix A: Power Consumption Test

    Appendix A: Power Consumption Test Condition Item Spec Atom E3815 1.46 Ghz / E3845 1.91 Ghz SDRAM DDR3L 1066 2GB / DDR3L 1333 4GB Operating System Windows 7 / SP1 Test Program 3D Mark 06 HDD 2.5" SATA Slim Type HDD mSATA 32GB Test Result for reference only !

  • Page 88: Appendix B: Resolution List

    Appendix B: Resolution list 640 x 480 x ( 256 / 16bit / 32bit ) 800 x 600 x ( 256 / 16bit / 32bit ) 1024 x 768 x ( 256 / 16bit / 32bit ) 1152 x 864 x ( 256 / 16bit / 32bit ) 1280 x 600 x ( 256 / 16bit / 32bit ) 1280 x 720 x ( 256 / 16bit / 32bit ) 1280 x 768 x ( 256 / 16bit / 32bit )

  • Page 89: Appendix C: F75111N I C Dio Device

    Appendix C: F75111N I C DIO device 1-1 IO Device:F75111 under DOS The Sample code source you can download from Source fi le: F75111_Dos_Src.rar http://tprd.info/lexwiki/index.php/IO_Device:F75111_under_DOS Binary fi le: F75111_Dos_Bin.rar USERNAME & PASSWORD: sf How to use this Demo Application 1.Boot Ms-Dos Operating System 2.execute "75WDT.EXE"...

  • Page 90: Io Device: F75111 Under Windows

    1-2 IO Device: F75111 under Windows The Sample code source you can download from Source fi le: F75111_DIOSrc.rar http://tprd.info/lexwiki/index.php/IO_Device:F75111 Binary fi le: F75111_DemoBin.rar USERNAME & PASSWORD: sf How to use this Demo Application 1. Press the "Start" button to test DIO function 2.
  • Page 91 p.s. f75111 send "F75111_SetWDTEnable(BYTE byteTimer)" including a parameter "timer", if there's no disable signal (F75111_SetWDTDisable()) to stop it before timer countdown to 0, System will reboot. if there's disable signal received, resent Enable WDT signal, for a loop to prevent from reboot Introduction Initial Internal F75111 port address (0x9c) defi...
  • Page 92 Set output value void F75111::InterDigitalOutput(BYTE byteValue) BYTE byteData = 0; byteData = (byteData & 0x01 )? byteValue + 0x01 : byteValue; byteData = (byteData & 0x02 )? byteValue + 0x02 : byteValue; byteData = (byteData & 0x04 )? byteValue + 0x04 : byteValue; byteData = (byteData &...

  • Page 93: Io Device: F75111 Vb6 Under Windows

    Disable WatchDog void F75111_SetWDTDisable () WriteByte(F75111_INTERNAL_ADDR,WDT_CONFIGURATION,0x00); // Disable WatchDog 1-3 IO Device: F75111 VB6 under Windows The Sample code source you can download from Source fi le: 75111_VB_v10.rar http://tprd.info/lexwiki/index.php/IO_Device:F75111_VB6 Binary fi le: 75111_VB_Src.rar USERNAME & PASSWORD: sf How to use this Demo Application A Function - Enable WDT timer ,Key-in the value by seconds then system will reboot after value which you key-in in left text box !! B Function - Disable WDT timer ,Push down the button then WDT timer value will be clear !!
  • Page 94 SDK Function Introduction Function EnableWDT Function EnableWDT(timer As Integer) Call WriteI2CByte(&H3, &H3) Call WriteI2CByte(&H37, timer) Call WriteI2CByte(&H36, &H73) End Function Function DisableWDT Function DisableWDT() Call WriteI2CByte(&H36, &H0) End Function Function SetDOValue Function SetDOValue(dovalue As Integer) Call WriteI2CByte(&H23, &H0) Call WriteI2CByte(&H20, &HFF) Call WriteI2CByte(&H2B, &HFF) Call WriteI2CByte(&H21, dovalue) End Function...

  • Page 95: Io Device: F75111 Under Linux

    1-4 IO Device: F75111 under linux The Sample code source you can download from Source fi le: F75111v2.0L.tar.gz http://tprd.info/lexwiki/index.php/IO_Device:F75111_under_linux Binary fi le: F75111v2.0LBin.tar.gz USERNAME & PASSWORD: sf How to compile source code 1. Compile source code with Code::Blocks download and install the Code::Block with command "apt-get install codeblocks" Open an exist project(F75111.cbp) in Code::Blocks, click the compile button ( add an option 'pkg-confi...
  • Page 96 1. Press the "Start" button to test DIO function 2. Press the "Enable" button to test WDT function 3. Press the "Disable" button to disable WDT 4. Check the "Enable Loop" box and press "Enable" to do WDT loop test 5.
  • Page 97 Set output value void F75111::InterDigitalOutput(BYTE byteValue) BYTE byteData = 0; byteData = (byteData & 0x01 )? byteValue + 0x01 : byteValue; byteData = (byteData & 0x02 )? byteValue + 0x02 : byteValue; byteData = (byteData & 0x04 )? byteValue + 0x04 : byteValue; byteData = (byteData &...
  • Page 98 Enable WatchDog void F75111_SetWDTEnable (BYTE byteTimer) WriteByte(F75111_INTERNAL_ADDR,WDT_TIMER_RANGE ,byteTimer); // set WatchDog range and timer WriteByte(F75111_INTERNAL_ADDR,WDT_CONFIGURATION,WDT_TIMEOUT_FLAG | WDT_ENABLE | WDT_PULSE | WDT_PSWIDTH_100MS); // Enable WatchDog, Setting WatchDog confi gure Disable WatchDog void F75111_SetWDTDisable () WriteByte(F75111_INTERNAL_ADDR,WDT_CONFIGURATION,0x00); // Disable WatchDog...

Table of Contents