Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Lex Computech Manuals
  4. Computer Hardware
  5. CI770A
  6. Instruction manual

Lex Computech CI770A Instruction Manual

Intel mobile ivy bridge processor + (pch)qm77 / ddr3 1066/1333 mt/s / lan / dvi/ hdmi /audio /usb / pcie mini card
Hide thumbs Also See for CI770A:

Advertisement

Quick Links

Download this manual
CI770A / CI770C
Intel Mobile Ivy Bridge processor +
(PCH)QM77 / DDR3 1066/1333 MT/s /
LAN / DVI/ HDMI /Audio /USB / PCIe mini card
All-In-One
Intel Mobile Ivy Bridge CPU
VGA, DVI, HDMI, LVDS, PCIe mini card
Multi-COM Board, Audio, LAN, SATA, USB
NO. CI770A / CI770C
Release date:
FED. 10. 2014

Advertisement

loading
Need help?

Need help?

Do you have a question about the CI770A and is the answer not in the manual?

Questions and answers

Related Manuals for Lex Computech CI770A

Summary of Contents for Lex Computech CI770A

  • Page 1 (PCH)QM77 / DDR3 1066/1333 MT/s / LAN / DVI/ HDMI /Audio /USB / PCIe mini card All-In-One Intel Mobile Ivy Bridge CPU VGA, DVI, HDMI, LVDS, PCIe mini card Multi-COM Board, Audio, LAN, SATA, USB NO. CI770A / CI770C Release date: FED. 10. 2014...

  • Page 2: Table Of Contents

    Contents CI770A/C Warning!........................... Hardware Notice Guide ..................... CHAPTER 1 GENERAL INFORMATION ................ 1-1 MAJOR FEATURE......................1-2 SPECIFICATION ......................1-3 INSTALLING THE CPU/ NORTH BRIDGE CHIP HEATSINK.(SOCKET VERSION)... 1-4 VERTICAL SODIMM ASSEMBLY GUIDE ..............1-5 INSTALLING THE CFAST (OPTION) ................1-6 DIRECTIONS FOR INSTALLING THE MINI CARD ............
  • Page 3 LPT INTERFACE (LINE PRINT TERMINAL) .............. DVI-D / VGA / HDMI / DP / LVDS CONNECTOR ............3-10 COM PORT CONNECTOR ..................3-11 AUDIO PORT CONNECTOR ..................3-12 AUDIO AMPLIFIER CLESS AB TWO CHANNEL 2W / CH ........3-13 SPDIF DIGITAL PHOTO OUT CONNECTOR ............3-14 DIGITAL INPUT / OUTPUT / WATCH DOG TIME ............
  • Page 4 4-7-7 F71869 SUPER IO CONFIGURATION ..............4-7-7-1 SERIAL PORT 1 CONFIGURATION & SERIAL PORT 2 CONFIGURATION ..4-7-8 F71869 H/W MONITOR ..................4-7-9 F81216 SECOND SUPER IO CONFIGURATION ..........4-7-9-1 SERIAL PORT 3~6 CONFIGURATION ............. 4-7-10 SERIAL PORT CONSOLE REDIRECTION ............4-7-11 NETWORK STACK ....................
  • Page 5 Copyright This manual is copyrighted and all rights are reserved. It does not allow any non authorization in copied, photocopied, translated or reproduced to any electronic or machine readable form in whole or in part without prior written consent from the manufacturer.
  • Page 6 Warning ! 1. Battery Battery on board is consumables. We doesn’t guarantee the life time of it. 2. Fanless solution with HDD Please be aware of specification & limitation for HDD when fanless solution is implemented. 3. We will not give further notification if there is any change about the product information and the manual.

  • Page 7: Hardware Notice Guide

    Hardware Notice Guide 1. Before installing the power supply with this motherboard, please attach the 12V/DC ( 4 pin connector )of the adapter to motherboard first. After that, plug the adapter power to AC outlet. Always normally shut down the computer before you move the system unit or remove the power supply from the motherboard.
  • Page 8 Photo 1 Insert Unplug...

  • Page 9: General Lnformation

    Networking, POS and Automation Control applications. High-performance and power-efficient communication platform, the embedded motherboard of CI770A/C is specially designed for advanced POS systems where the economical use of power is in high demand. Also, the high performing CI770A/C comes with two DDR3 1066/1333 MHz SO-DIMM slots with up to 16GB memory and four SATA ports.

  • Page 10: Major Feature

    1-1 Major Feature 1. Intel Mobile Ivy Bridge processor in Socket G2 package (rPGA988B) 2. Intel Panther Point Platform Controller Hub (PCH) QM77 and Integrated Graphic Chip 3. Support 2 x DDR3 SO-DIMM socket (up to 16GB) 4. On board SSD flash memory 2 / 4 / 8/16/32/64 GB (option) 5.

  • Page 11: Specification

    1-2 Specification 1. CPU: Intel Mobile Sandy Bridge processor in Socket G2 package (rPGA988B) 2. Chipset: Intel Panther Point Platform Controller Hub (PCH) QM77 3. Memory: 2 x DDR3 SO-DIMM socket (up to 16GB) 4. Graphics: Integrated with Intel Mobile Sandy Bridge Processor 5.

  • Page 12: Installing The Cpu/ North Bridge Chip Heatsink.(Socket Version)

    1-3 Installing the CPU / PCH Heatsink. (Socket Version) 1. Install CPU bracket under the CPU first. 2.1. Locate Pin1 in the socket,look for a golden narrow. Golden arrow Socket Pin1 2. Use screw driver and screw the socket 2.2. Lock the CPU socket by securing the screw in anti-clockwise direction.
  • Page 13 3. Peel-off the Elastic Silicone sticker under 3.2 Insert the system fan power cable to the Heat Sink. the pin header (FAN1) on board. 3.1 Tighten the HEAT SINK on the motherboard. Pay attention to tighten the screws diagonally.

  • Page 14: Vertical Sodimm Assembly Guide

    1-4 Vertical SODIMM assembly guide Uninstall 1. Pull open both sides of the memory slot. 2. Take out the memory.

  • Page 15: Installing The Cfast (Option)

    1-5 Installing the CFast (option) 1. Install the CFast card into the CFast socket.

  • Page 16: Directions For Installing The Mini Card

    1-6 Directions for installing the Mini Card 1. Unscrew the screw on the board 2. Plug in the Mini Card in a 45 angle 3. Gently push down the Mini Card and screw the screw back.

  • Page 17: Packing List (Ci650A/C)

    1-7 Packing List-CI770A/C CI770A/C Material Code Description Detail Specification Quantit 7G1901-1261001-0 MB-CI770A-6CXX-001 LF ,CI770A-6CXX,Rev.:001 6G8006-2341-0100 DVD LF ,Intel Cedarview-D+ICH10R/NM10 6G7300-4526-0100 Cooler LF ,H=26.5mm,4.5Krpm,55W,CI770 6G5212-1203-0200 120W Power Adapter,12V LF ,M4p/Lock,FSP120-AHAN1,FSP 6G8001-2182-0400 Manual LF ,M/B,CI770A/C 6G6001-2005-0100 COM FK LF ,2.0 2*5P/DB9P ,L=15cm...

  • Page 18: Chapter 2 Hardware Installation

    Please follow section 1-6, 2-1 and 2-2 to check the delivery package and unpack carefully. Please follow the jumper setting procedure. 2-1 Unpacking Precaution The CI770A/C board has been well packed with an anti-static bag to protect its sensitive components and circuitry from damage due to static electric discharge. NOTE! 1.

  • Page 19: Unpacking Checkup

    2-2 Unpacking checkup First of all, please follow all necessary steps of section 2-1 to protect CI770A/C from electricity discharge. With reference to section 1-7, please check the delivery package again with following steps: 1. Unpack the CI770A/C board and keep all packing material, manual and driver disc etc, do not dispose ! 2.

  • Page 20: Dimension-Ci650A/C (200 X 150Mm)

    2-3 Dimension-CI770A/C 200 x 150mm 202.70 189.90 5- Ø 3.40 5- Ø 6 5.10 189.80 23.76 22.48 19.10 8.60 7.88 6.60...

  • Page 21: Layout-Ci650A/C

    2-4 Layout- CI770A/C CG11 JVGA1 JVGA2 CPI1 CDG1 CPI11 CC21 CC11 CC41 CC31 CA12 CC12 CUL1 CUL2 CC34 HDMI CPI14 SPDIF1 CPI13 CAR1 CAL1 COS1 COH1 JVC6 LPT1 CC13 CKM1 SIM1 SIM2 CFA1 MPCE1 MPCE2 CPO1 CPO2 CPO3 SWP1 CFP1...

  • Page 22: Diagram-Ci650A

    2-5 Diagram- CI770A CG11 CDG1 CC12 CC34 CUL1 CUL2 CPI1 CA12 HDMI CAR1 CPI13 CAL1 COS1 COH1 CKM1 CC13 JVC6 LPT1 SIM1 SIM2 CU12 CU10 CU13 CFA1 JSB2 CU11 CU14 JSB1 MPCE1 JSD1 MPCE2 JVU14 SODIM1 JSP1 SODIM2 CPO1 CPO2...

  • Page 23: Diagram-Ci650C

    2-5-1 Diagram- CI770C CG11 CDG1 CC12 CC34 CUL1 CUL2 CPI1 CA12 HDMI CAR1 CPI13 CAL1 COS1 COH1 CKM1 CC13 JVC6 LPT1 SIM1 SIM2 CU12 CU10 CU13 CFA1 JSB2 CU11 CU14 JSB1 MPCE1 JSD1 MPCE2 JVU14 SODIM1 JSP1 SODIM2 CPO1 CPO2 CPO3 SWP1 CFP1...

  • Page 24: Install Memory

    2-6 Install Memory This motherboard provides one 204-pin Small Outline Dual In-line Memory Module (SODIMM) socket for memory expansion available maximum to 2GB/4GB/8GB DDR3 SDRAM. DDR3 clock supports: DDR3 1066/1333MT/S Valid Memory Configurations Total Memory DIMM1 System Accept or Not Max.

  • Page 25: List Of Jumpers

    NOTE! When you install DIMM module fully into the DIMM socket, the eject tab should be locked into the DIMM module very firmly and fit into its indention on both sides. Please refer to page 9 for installation of memory module. WARNING! Once you hear "...

  • Page 26: Jumper Setting Description

    2-8 Jumper Setting Description A jumper is ON as a closed circuit with a plastic cap covering two pins. A jumper is OFF as an open circuit without the plastic cap. Some jumpers have three pins, labeled 1, 2, and 3. You could connect either pin 1 and 2 or 2 and 3. The below figure 2.2 shows the examples of different jumper settings in this manual.

  • Page 27: Jsb2: Me Rtc Data Clear

    Note: Do not clear CMOS unless JSB1 Description 1. Troubleshooting *open *Normal Set 2. Forget password short CMOS Data clear 3. You fail over-clocking system Note: normal work is open jumper JSB1 Short *Open 2-10 JSB2: ME RTC Data clear A battery must be used to retain the motherboard configuration in ME RAM.

  • Page 28: Jsp1: At / Atx Power Select

    2-11 JSP1: AT / ATX power select JSP1 Description *1-2 *ATX Power mode AT Power mode JSP1 ATX Power AT Power 2-12 JSC2,JSC21/22/23/24: COM2 RS232/RS422/RS485 select JSC2 JSC21 JSC22 JSC23 JSC24 Description *1-2 *1-2 *1-2 *1-2 *1-2 RS232* RS422 RS485 JSC22 JSC21 JSC22 JSC21 JSC22 JSC21...

  • Page 29: Com Port Pin9 Select Ri Signal Or Voltage Source

    2-13 COM port pin9 select RI signal or Voltage source JVC1: COM1 PIN9 select JVC2: COM2 PIN9 select JVC3: COM3 PIN9 select JVC4: COM4 PIN9 select JVC5: COM5 PIN9 select JVC6: COM6 PIN9 select JVC1/2/3/4/5/6 Description *1-2 COM port pin9 use RI signal COM port pin9 use +5V voltage COM port pin9 use +12V voltage Note : 1.

  • Page 30: Jvl1: Lvd Panel Power Select

    2-14 JVL1: LVD panel power select JVL1 Description *2-3 *+3.3V Note : Attention ! Check Device Power in spec. JVL1 For eDP and LVDS panel power setting JVL1 +3.3V* 2-15 JVP1: LVDS Panel Inverter power select JVP1 Description +12V *2-3 *+5V Note : Attention ! Check Device Power in spec.

  • Page 31: Jvu14: Usb Port 14 Voltage Select

    2-16 JVU14 : USB Port 14 Voltage select JVU14 Description *1-2 *+5V +3.3V Note : Attention ! Check Device Power in spec. JVU14 +5V* +3.3V 2-17 JSD1: DPC Duty set JSD1 Description Low 0% (Low level ) *2-3 *Hi 100% (3.3V level) Note: for Panel backlight dimming default active set JSD1 3.3V*...

  • Page 32: Chapter 3 Connection

    Chapter-3 Connection This chapter provides all necessary information of the peripheral's connections, switches and indicators. Always power off the board before you install the peripherals. 3-1 List of Connectors CA12: Mic-in (down side) / Line out (up side) phone jack. CA3: Line-out/Line-in/Mic-in 2x5 pin (2.0mm) wafer.
  • Page 33 List of Connectors CIO1: DI port 0 ~ 3, DO port 0 ~ 3 2x5 pin (2.0mm) wafer. CIO2: DI port 4 ~ 7, DO port 4 ~ 7 2x5 pin (2.0mm) wafer. CIO3: DI port 8 ~11, DO port 8 ~ 11 2x5 pin (2.0mm) wafer(TBD) CIO4: DI port 12 ~15, DO port 12 ~ 15 2x5 pin (2.0mm) wafer(TBD).
  • Page 34 List of Connectors MPCE2: Mini card port 2 sockets 52pin. SIM1: SIM port 1 card socket. SIM2: SIM port 2 card socket. CFP1: Front panel port 2x5 pin (2.54mm) wafer. SWP1: Power On/Off switch wafer. FAN1: CPU fan 1x3 pin (2.54mm) wafer. FAN2: System fan 1x3 pin (2.54mm) wafer.

  • Page 35: Fan Connector

    3-2 FAN Connector FAN1: CPU FAN connector (3pin 2.5mm wafer) FAN2: System FAN connector (3pin 2.5mm wafer) PIN NO. Description +12V FAN speed detect Note: DC in +12V by switch to FAN power +12V, so DC in need stable +12V input FAN2 FAN1 pin1...

  • Page 36: Cfast Card Reader (Option)

    3-4 CFast card Reader (option) CFA1: CFA Socket For SATA Interface (24pin CFA Socket) PIN NO. DESCRIPTION CFA1 CFA1 SATA TX+ SATA TX- SATA RX- SATA RX+ GND(Card Detect In) NC(LED Out) NC(LED Out) PC10 PC11 PC12 PC13 +3.3V PC14 +3.3V PC15 pin1...

  • Page 37: Cul1 / Cul2 Lan + Usb Connector

    CU14: USB14 port (4pin 1.25mm Wafer) PIN NO. Description +5V or +3.3V USB DATA - USB DATA + Note: 1.PIN 1 Voltage select from JSU14 pin1 CU14 CUL1 / CUL2 LAN + USB connector CUL1/CUL2 (Down side): USB3.0/2.0 Type A jack Description PIN NO.

  • Page 38: Ps2 Kb/Ms

    3-7 PS2 KB/MS CKM1: KB/MS port 1x6pin (1.25mm) Wafer PIN NO. Description KB/DAT KB/CLK MS/DAT MS/CLK pin1 CKM1 3-8 LPT interface (Line Print Terminal) LPT1: LPT 2x13 pin (2.0mm)wafe header. LPT1 PIN NO. Description PIN NO. Description pin1 STROBE# AUTO FROM FEED# DATA0 ERROR# DATA1...

  • Page 39: Dvi-D / Vga / Hdmi / Dp / Lvds Connector

    3-9 DVI-D / VGA / HDMI / DP / LVDS Connector CDG1: DVI 12bit connector down side (DB Connector) PIN NO. Description PIN NO. Description PIN NO. Description Data 0 - Data 2 - Data 1 - Data 0 + Data 2 + Data 1+ I C-CLK...

  • Page 40: Com Port Connector

    3-10 COM Port Connector COM2 default support RS232/RS422/RS485 mode COM1/3/4/5/6 default support RS232 mode RS232 Mode connector (D-SUB 9pin) CC12: COM1 (up side) / COM2 (down side) port connector CC34: COM3 (up side) / COM4 (down side) port connector CC2: COM2 Single port connector. (The location share with CC12) CC4: COM4 Single port connector.
  • Page 41 RS232 ports (2x5pin 2.0mm Wafer) CC11: COM1 CC21 : COM2 CC31: COM3 CC41 : COM4 CC5: COM5 CC6 : COM6 pin1 pin1 PIN NO. Description PIN NO. Description CC21 CC11 RI/ Voltage Note: 1. CC11, CC21 share with CC12 connector for OEM 2.
  • Page 42 CC13: COM1 RS232 port (5pin 1.25mm Wafer) PIN NO. Note: All signals are RS232 level. COM ports from (PLX OXPCIe954) COM7/8/9/10 default support RS232 mode COM7/8/9/10 is option for OEM. RS232 ports (2x5pin 2.0mm Wafer) CC7: COM7 CC8 : COM8 CC9: COM9 CC10 : COM10 Description...

  • Page 43: Audio Port Connector

    3-11 Audio Port Connector The CI650A/C has an on-board AC'97 3D sound interface. There are the connectors of LINE OUT, MIC-IN connectors. The MIC-IN Jack header are for audio sound input. The LINE-OUT connector is a 4-pin Jack for audio sound output. CA12: Up side Line out (3.5mm phone jack) PIN NO.

  • Page 44: Spdif Digital Photo Out Connector

    3-13 SPDIF Digital Photo out connector SPDIF1: SPDIF audio output connector. PIN NO. Description Audio DATA Note: Share CA12 location, by OEM SPDIF1 3-14 Digital Input / Output / Watch Dog Time CIO1 DIO 0 ~ 3 (2x5pin 2.0mm wafer) Description Description PIN NO.
  • Page 45 CIO4 CIO3 DIO 8 ~ 11 (2x5pin 2.0mm wafer) (TBD) pin1 Description Description PIN NO. PIN NO. DI-8 DO-11 DI-9 DO-10 pin1 DI-10 DO-9 DI-11 DO-8 CIO3 Note: 1. CIO3 is option function 2. DI pin default pull up 10KΩ to +5V 3.

  • Page 46: Io Device:f75111 Under Dos

    3-14-1 IO Device:F75111 under DOS The Sample code source you can download from Source file: F75111_Dos_Src.rar http://tprd.info/lexwiki/index.php/IO_Device:F75111_under_DOS Binary file: F75111_Dos_Bin.rar USERNAME & PASSWORD: sf How to use this Demo Application 1.Boot Ms-Dos Operating System 2.execute "75WDT.EXE" binary file 3.Input 1 to Enable WDT timer or input 0 to Disable it. 4.input numbers of second for chip countdown and Reset Computer Introduction Enable Watch Dog Timer...

  • Page 47: Io Device: F75111 Under Windows

    3-14-2 IO Device: F75111 under Windows The Sample code source you can download from Source file: F75111_DIOSrc.rar http://tprd.info/lexwiki/index.php/IO_Device:F75111 Binary file: F75111_DemoBin.rar USERNAME & PASSWORD: sf How to use this Demo Application 1. Press the "Start" button to test DIO function 2.
  • Page 48 p.s. f75111 send "F75111_SetWDTEnable(BYTE byteTimer)" including a parameter "timer", if there's no disable signal (F75111_SetWDTDisable()) to stop it before timer countdown to 0, System will reboot. if there's disable signal received, resent Enable WDT signal, for a loop to prevent from reboot Introduction Initial Internal F75111 port address (0x9c) define GPIO1X, GPIO2X, GPIO3X to input or output...
  • Page 49 Set output value void F75111::InterDigitalOutput(BYTE byteValue) BYTE byteData = 0; byteData = (byteData & 0x01 )? byteValue + 0x01 : byteValue; byteData = (byteData & 0x02 )? byteValue + 0x02 : byteValue; byteData = (byteData & 0x04 )? byteValue + 0x04 : byteValue; byteData = (byteData &...

  • Page 50: Io Device: F75111 Vb6 Under Windows

    Disable WatchDog void F75111_SetWDTDisable () WriteByte(F75111_INTERNAL_ADDR,WDT_CONFIGURATION,0x00); // Disable WatchDog 3-14-3 IO Device: F75111 VB6 under Windows The Sample code source you can download from Source file: 75111_VB_v10.rar http://tprd.info/lexwiki/index.php/IO_Device:F75111_VB6 Binary file: 75111_VB_Src.rar USERNAME & PASSWORD: sf How to use this Demo Application A Function - Enable WDT timer ,Key-in the value by seconds then system will reboot after value which you key-in in left text box !! B Function - Disable WDT timer ,Push down the button then WDT timer value will be clear !!
  • Page 51 SDK Function Introduction Function EnableWDT Function EnableWDT(timer As Integer) Call WriteI2CByte(&H3, &H3) Call WriteI2CByte(&H37, timer) Call WriteI2CByte(&H36, &H73) End Function Function DisableWDT Function DisableWDT() Call WriteI2CByte(&H36, &H0) End Function Function SetDOValue Function SetDOValue(dovalue As Integer) Call WriteI2CByte(&H23, &H0) Call WriteI2CByte(&H20, &HFF) Call WriteI2CByte(&H2B, &HFF) Call WriteI2CByte(&H21, dovalue) End Function...

  • Page 52: Io Device: F75111 Under Linux

    3-14-4 IO Device: F75111 under linux The Sample code source you can download from Source file: F75111v2.0L.tar.gz http://tprd.info/lexwiki/index.php/IO_Device:F75111_under_linux Binary file: F75111v2.0LBin.tar.gz USERNAME & PASSWORD: sf How to compile source code 1. Compile source code with Code::Blocks download and install the Code::Block with command "apt-get install codeblocks" Open an exist project(F75111.cbp) in Code::Blocks, click the compile button ( add an option 'pkg-config --libs gtk+-2.0 gthread-2.0' in "Project->Build Option->...
  • Page 53 1. Press the "Start" button to test DIO function 2. Press the "Enable" button to test WDT function 3. Press the "Disable" button to disable WDT 4. Check the "Enable Loop" box and press "Enable" to do WDT loop test 5.
  • Page 54 Set output value void F75111::InterDigitalOutput(BYTE byteValue) BYTE byteData = 0; byteData = (byteData & 0x01 )? byteValue + 0x01 : byteValue; byteData = (byteData & 0x02 )? byteValue + 0x02 : byteValue; byteData = (byteData & 0x04 )? byteValue + 0x04 : byteValue; byteData = (byteData &...
  • Page 55 Enable WatchDog void F75111_SetWDTEnable (BYTE byteTimer) WriteByte(F75111_INTERNAL_ADDR,WDT_TIMER_RANGE ,byteTimer); // set WatchDog range and timer WriteByte(F75111_INTERNAL_ADDR,WDT_CONFIGURATION,WDT_TIMEOUT_FLAG | WDT_ENABLE | WDT_PULSE | WDT_PSWIDTH_100MS); // Enable WatchDog, Setting WatchDog configure Disable WatchDog void F75111_SetWDTDisable () WriteByte(F75111_INTERNAL_ADDR,WDT_CONFIGURATION,0x00); // Disable WatchDog...

  • Page 56: Lvds Interface Connector

    3-15 LVDS Interface Connector LVDS1: 18/24bits LVDS interface (2x15pin 1.25mm wafer) Description Description PIN NO. PIN NO. PWM dimming +LCD(5V or 3.3V) +LCD(5V or 3.3V) LVDS1 Channel-1-DATA3+ Channel-0-DATA3+ Channel-1-DATA3- Channel-0-DATA3- Channel-0-DATA2+ Channel-0-CLK+ pin1 Channel-0-DATA2- Channel-0-CLK- Channel-0-DATA1+ Channel-0-DATA0+ Channel-0-DATA1- Channel-0-DATA0- +LCD(5V or 3.3V) +LCD(5V or 3.3V) Channel-1-DATA2+ Channel-1-CLK+...

  • Page 57: Touch Screen Device

    3-17 Touch screen device CT1: Touch screen (2x5 pin 2.0mm wafer) Default use USB interface, can change COM interface By OEM BOM For 8- wire type pin define Description Description PIN NO. PIN NO. Bottom Bottom Sense Top Sense Right Right Sense Left Left Sense...

  • Page 58: Dc 12V-In External Connector

    3-18 DC 12V-IN external Connector CPI1: DC 12V-IN external Connector (4pin mini din connector) CPI1 Note: DC in from adapter plug in CPI11: DC 12V-IN Internal Connector (2x2pin 4.2mm ATX connector) The location share with CPI1 Note: This connector share with CPI1 for OEM CPI13: DC 12V-IN Internal Connector (4pin 2.0mm wafer) pin1 CPI13...

  • Page 59: I C Bus Interface

    3-20 I C Bus Interface CO1: I C(SM) bus connector (4 pin 1.25mm wafer) pin1 3-21 HDMI interface HDMI1: HDMI1 type A connector Description Description Description Description PIN NO. PIN NO. PIN NO. PIN NO. TMDS2(p) TMDS2(n) TMDS1(p) TMDS1(n) TMDS0(p) TMDS0(n) TMDS CLK(p) TMDSCLK(n)

  • Page 60: Mini Card / Sim Card

    3-22 Mini card / SIM card MPCE1/MPCE2: Support USB and PCIe by one Interface (Mini card socket 52pin) Description Description PIN NO. PIN NO. +3.3V +1.5V SIM Power SIM Data PCIe-CLK- SIM CLK PCIe-CLK+ SIM Reset SIM RFU RST- PCIe-RX-/mSATA-RX+ +3.3V PCIe-RX+/mSATA-RX- +1.5V...

  • Page 61: Front Panel Connector

    3-23 Front Panel connector CFP1 Front panel connector (2x5pin 2.54mm wafer) PIN NO. Description PIN NO. Description Power button GND Power button pin Reset GND Reset pin Power LED + Power LED - HDD LED+ HDD LED- LAN LED+ LAN LED- SWP1 PB connector (2pin 2.0mm wafer) CFP1 SWP1...

  • Page 62: Pci Gold Finger Pin Define

    3-26 PCI Gold Finger PIN Define PIN NO. Description PIN NO. Description PIN NO. Description PIN NO. Description +12V +3.3V +3.3V +3.3V BUF_PLT_RST# SMB_CLK CLK_PCIE_AP SMB_DATA CLK_PCIE_AN +3.3V PCIE_RXP_A PCIE_RXN_A PCIE_TXN_A +3.3V PCIE_TXP_A +3.3A +3.3V P_PME# +3.3V +3.3V +3.3V CLK_PCIE_BP CLK_PCIE_BN PCIE_TXN_B PCIE_TXP_B...

  • Page 63: Chapter 4 Introduction Of Bios

    Chapter 4 Introduction of BIOS The BIOS is a program located in the Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gains control. The BIOS first operates an auto-diagnostic test called POST (Power on Self Test) for all the necessary hardware, it detects the entire hardware devices and configures the parameters of the hardware synchronization.

  • Page 64: Bios Menu Screen

    4-2 BIOS Menu Screen The following diagram show a general BIOS menu screen Main Advanced Chipset Boot Security Save & Exit Menu Bar BIOS Vendor CI770C/A Set the Date. Use Tab to switch between Processor Information Date elements. Name IvyBridge Brand String Intel(R) Core(TM) i7 Frequency...

  • Page 65: Getting Help

    4-4 Getting Help Main Menu The on-line description of the highlighted setup function is displayed at the top right corner the screen. Status Page Setup Menu/ Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.

  • Page 66: Advanced

    System Date Set the Date. Please use [Tab] to switch between data elements. System Time Set the Time. Please use [Tab] to switch between data elements. 4-7 Advanced Main Advanced Chipset Boot Security Save & Exit ►ACPI Settings System ACPI Parameters. ►S5 RTC Wake Settings ►CPU Configuration ►SATA Configuration...

  • Page 67: Acpi Settungs

    F71869 Super IO Configuration Please refer section 4-7-7 F71869 H/W Monitor Please refer section 4-7-8 F81216 Second Super IO Super IO Configuration Please refer section 4-7-9 Serial Port Console Redirection Please refer section 4-7-10 Network Stack Please refer section 4-7-11 4-7-1 ACPI Settings Main Advanced...

  • Page 68: S5 Rtc Wake Settings

    4-7-2 S5 RTC Wake Settings Main Advanced Chipset Boot Security Save & Exit Enable or disable Wake system with Fixed Time [ Disabled ] System wake on alarm Wake system with Dynamic Time event. When enable, [ Disabled ] System will wake on the hr :: min :: sec specified →←: Select Screen ↑...

  • Page 69: Cpu Configuration

    4-7-3 CPU Configuration Main Advanced Chipset Boot Security Save & Exit CPU Configuration Number of cores to enable in each processor package. Intel(R) Core(TM) i7-3610QE CPU @ 2.30GHz CPU Signature 306a9 Microcode Path Max CPU Speed 2300 MHz Min CPU Speed 1200 MHZ CPU Speed 2300 MHZ...

  • Page 70: Sata Configuration

    4-7-4 SATA Configuration Main Advanced Chipset Boot Security Save & Exit SATA Controller(s) [Enabled] Enable or disable SATA Device. SATA Mode Selection [IDE] →←: Select Screen ↑ ↓ : Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...

  • Page 71: Software Feature Mask Configuration

    SATA Controller Speed Indicates the maximum speed the SATA controller can support. The optional settings: Gen1, Gen2, Gen3. Software Feature Mask Configuration Please refer section 4-7-4-1-1 4-7-4-1-1 ►Software Feature Mask Configuration Main Advanced Chipset Boot Security Save & Exit RAID0 [Enabled] Enable or disable RAID0 feature.

  • Page 72: Usb Configuration

    SATA Controller(s) SATA Mode Selection SATA Controller Speed ►Software Feature Mask Configuration Please refer section 4-7-4-1-1 Alternate ID Report alternate Device ID The optional settings: Enabled, Disabled. 4-7-5 USB Configuration Main Advanced Chipset Boot Security Save & Exit Enables Legacy USB USB Configuration support.

  • Page 73: Smart Settings

    EHCI Hand-off This is a workaround for OSes without EHCI handoff support. The EHCI ownership change should be claimed by EHCI driver. The optional settings are: Enabled, Disabled. 4-7-6 SMART Settings Main Advanced Chipset Boot Security Save & Exit Smart Settings Run SMART Self Test on all HDDs during POST.

  • Page 74: Serial Port 1 Configuration & Serial Port 2 Configuration

    Serial Port 0 Configuration Please refer section 4-7-7-1 Serial Port 1 Configuration Please refer section 4-7-7-1 Power Failure This item specifies whether your system will reboot after a power failure or interrupt occurs. [Keep last state] Restores the system to the status before power failure or interrupt occurred. [Bypass mode] Restores the system to the bypass mode.

  • Page 75: F71869 H/W Monitor

    4-7-8 F17869 H/W Monitor F17869 H/W Monitor Press [Enter] to view PC health status. This section shows the status of your CPU, Fan, and overall system. This is only available when there is Hardware Monitor function onboard. 4-7-9 F81216 Second Super IO Configuration Main Advanced Chipset...

  • Page 76: Serial Port 3~6 Configuration

    4-7-9-1 Serial Port 3~6 Configuration Main Advanced Chipset Boot Security Save & Exit Serial Port 3~6 Configuration Enable or Disable Serial Port (COM) Serial Port [ Enabled ] Device Settings IO=260h; IRQ=11; Change Settings [ AUTO ] →←: Select Screen COM3 422/485 control flow [Disabled] ↑...

  • Page 77: Serial Port Console Redirection

    4-7-10 Serial Port Console Redirection Main Advanced Chipset Boot Security Save & Exit Console Redirection Console Redirection [ Disabled ] Enable or Disable. ►Console Redirection Settings →←: Select Screen ↑ ↓ : Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...

  • Page 78: Chipset

    4-8 Chipset Main Advanced Chipset Boot Security Save & Exit PCH Parameters ►PCH-IO Configuration ►System Agent (SA) Configuration →←: Select Screen ↑ ↓ : Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...

  • Page 79: Pci Express Configuration

    Wake on LAN Use this item to enable or disable integrated LAN to wake the system. 4-8-1-1 ► PCI Express Configuration Main Advanced Chipset Boot Security Save & Exit PCI Express Configuration PCI Express Configuration settings ►Mini PCIe 1 ►Mini PCIe 2 →←: Select Screen ↑...

  • Page 80: Pci Express X 1

    PCI Express Root Port 3/4 Control the PCI Express Root Port. The optional settings are: Enabled, Disabled. PCIe Speed Select PCI Express port speed. The optional settings are: Auto, Gen1, Gen2. 4-8-1-1-2 ► PCI Express x 1 Main Advanced Chipset Boot Security Save &...

  • Page 81: Usb Confuguration

    4-8-1-2 ►USB Configuration Main Advanced Chipset Boot Security Save & Exit USB Configuration Enable or disable XHCI Pre-Boot Driver support. XHCI Pre-Boot Driver [ Enabled ] xHCI Mode [ Smart Auto ] HS Port #1 Switchable [ Enabled ] HS Port #2 Switchable [ Enabled ] HS Port #3 Switchable [ Enabled ]...

  • Page 82: Pch Azalia Configuration

    USB Port Pre-Port Disable Control Use this item to control each of the USB ports (0~13) disabling. The optional settings are: Disabled, Enabled. 4-8-1-3 ►PCH Azalia Configuration Main Advanced Chipset Boot Security Save & Exit PCH Azalia Congiguration Control Detection of the Azalia device.

  • Page 83: Graphics Confuguration

    4-8-2-1 ►Graphics Configuration Main Advanced Chipset Boot Security Save & Exit Graphics Configuration Graphics turbo IMON current values IGFX VBIOS Version 2170 supported (14-31) IGfx Frequency 350 MHz Graphics Turbo IMON Current →←: Select Screen ↑ ↓ : Select Item Enter: Select Aperture Size [256MB]...

  • Page 84: Lcd Control

    4-8-2-1-1 ►LCD Control Main Advanced Chipset Boot Security Save & Exit Graphics Configuration Select the Video Device which will be activated during POST. This has Primary IGFX Boot Display [ CRT ] no effect if external Secondary IGFX Boot Display [ LVDS ] graphics present.

  • Page 85: Boot

    LCD Panel Type This item allows you to select the panel resolution This item allows you to select the panel resolution 1. VBIOS Default 2. 1024 X 600 LVDS 800 X 600 LVDS 4. 1024 X 768 LVDS1 5. 1280 X 1024 LVDS 6.

  • Page 86: Csm Parameters

    Gate A20 Active UPON REQUEST- GA20 can be disabled using BIOS services. ALWAYS- do not allow disabling GA20. CSM parameters Please refer section 4-9-1 4-9-1 CSM parameters Main Advanced Chipset Boot Security Save & Exit This option controls Boot option filter [Legacy only] what devices system Launch PXE OpROM policy...

  • Page 87: Save & Exit

    Administrator Password & User Password To set up an administrator password: 1. Select Administrator Password. The screen then pops up an Create New Password dialog. 2. Enter your desired password that is no less than 3 characters and no more than 20 characters.

  • Page 88: Chapter 5 Driver Installation

    Chapter 5 DRIVER INSTALLATION There is a system installation DVD in the package. This DVD does not only include all the drivers you need but also some other free application programs and utility programs. In addition, this DVD also includes an auto detect software telling you which hardware is installed and which driver is needed so that your system can function properly.
  • Page 89 AUTOMATIC DRIVER INSTALLATION menu 1. INF install Intel Ivy Bridge chipset driver 2. VGA install onboard VGA driver 3. SOUND install VIA HD Audio Codec driver 4. LAN to the LAN driver Readme file 5. COM to the COM driver Readme file 6.

  • Page 90: Inf Install Intel Ivy Bridge Chipset Driver

    5-1 INF Install Intel Ivy Bridge Chipset Driver 1. At the "AUTOMATIC DRIVER 2. At the "Intel® Chipset Device Software" INSTALLATION menu" screen, screen, click "Next". click "INF". 3. At the "License Agreement" screen, 4. At the "Readme File Information" screen, click "Yes".
  • Page 91 5. Click "Next" 6. Click "Finish" to restart computer. NOTE: SYSTEM INSTALL will auto detect file path For Windows XP 64/32-bit, Windows 7 64/32-bit and windows 8 64/32-bit X:\driver\INTEL\IVY_SAN\inf\infinst_autol.exe For Windows 8.1 64/32-bit...

  • Page 92: Vga Install Intel Ivy Bridge Vga Driver

    5-2 VGA Install Intel Ivy Bridge VGA Driver 1. At the "AUTOMATIC DRIVER 2. At the "Intel® HD Graphics Driver" screen, INSTALLATION menu" screen, click "Next". click "VGA". 3. At the "Welcome to the Setup Program” 4. At the "License Agreement” screen, screen, Click “Next”...
  • Page 93 5. At the "Readme File Information” 6. At the "Setup Progress” screen, screen, Click “Next”. Click “Next”. 7. Click “Finish” to restart computer NOTE: SYSTEM INSTALL will auto detect file path For Windows XP 64bit X:\driver\INTEL\IVY_SAN\vga\winxp64\winxp64_145110.exe For Windows XP 32bit X:\driver\INTEL\IVY_SAN\vga\winxp\winxp_145110.exe For Windows 7 64bit and Windows 8 64bit X:\driver\INTEL\IVY_SAN\vga\ WIN_7_8_64\ win64_152812.exe...

  • Page 94: Sound Install Realtek High Definition Audio Driver

    5-3 SOUND Install Realtek High Definition Audio Driver 1. At the "AUTOMATIC DRIVER 2. Click "Next". INSTALLATION menu" screen, click "SOUND". 3. Click "Finish" to restart computer NOTE: SYSTEM INSTALL will auto detect file path For Windows XP 32/64 bit X:\driver\INTEL\IVY_SAN\SOUND\WDM_R270.exe For Windows 7 32/64 bit and Windows 8 32/64 bit X:\driver\INTEL\IVY_SAN\SOUND\Vista_Win7_Win8_R270.exe...

  • Page 95: Usb 3.0 Install Intel Usb 3.0 Extensible Host Controller Driver

    5-4 USB 3.0 Install Intel USB 3.0 extensible Host Controller Driver 1. At the "AUTOMATIC DRIVER 2. At the "Intel® USB 3.0 extensible Host INSTALLATION menu" screen, Controller Driver" screen, Click" Next. Click "USB 3.0". 3. At the "License Agreement" screen, 4.
  • Page 96 5. Click "Next" 6. Click "Finish" to restart computer NOTE: The path of the file For Windows 7 32/64-bit X:\driver\INTEL\IVY_SAN\USB3_0\INTEL\Setup.exe...

  • Page 97: Me Install Intel Management Engine Interface Driver

    5-5 ME Install Intel Management Engine Interface Driver 1. Plaese Check Device Manager 2. At the "Intel® Management Engine ”PCI Simple Communications Components” screen, Click” Next. Controllers” 3. At the "Setup Progress” screen, 4. Click “Next” Click “Next”...
  • Page 98 5. At the "Readme File Information” 6. At the "Setup Progress” screen, screen, Click “Next”. Click “Next”. NOTE: The path of the file For Windows XP 32/64 bit and Windows 7 32/64-bit X:\driver\INTEL\ME TOOL\MEI-Only Installer\MEISetup.exe...

  • Page 99: How To Update Bios

    5-6 How to update AMI BIOS Step 1. To run afuwingui.exe then click "Open" Step 2. Click the new version BIOS (download from the website)
  • Page 100 Step 3. Choose "ProgramAll Blocks" and "Do Not Check ROM ID" Step 4. Click "Flash" Step 5. Click "Exit" and restart computer.

  • Page 101: Appendix A: Power Consumption Test

    Appendix A: Power Consumption Test Condition Item Spec i7-3610QE, i5-3610ME SDRAM DDR3 1600 / 16GB Operating System Windows 7 Test Program 3D Mark 11 Advanced Edition HDD 3.5" SATA Standard HDD HDD 2.5" SATA Slim Type HDD Test Result for reference ! Start up Operation Shut down...

  • Page 102: Appendix B: Resolution List

    Appendix B: Resolution list 640 x 480 x ( 256 / 16bit / 32bit ) 800 x 600 x ( 256 / 16bit / 32bit ) 1024 x 768 x ( 256 / 16bit / 32bit ) 1152 x 864 x ( 256 / 16bit / 32bit ) 1280 x 600 x ( 256 / 16bit / 32bit ) 1280 x 720 x ( 256 / 16bit / 32bit ) 1280 x 768 x ( 256 / 16bit / 32bit )

This manual is also suitable for:

Ci770c