1. Manuals
  2. Brands
  3. Lex Computech Manuals
  4. Motherboard
  5. 2I380D
  6. User manual

Lex Computech 2I380D User Manual

Intel bay trail-d j1900 quad core cpu, on board ddr3l, 3 x intel lan/usb/vga/com, all-in-one intel bay trail-i d j1900, 2.0 ghz vga, pcie mini card, m.2 b key sata multi-lan board, 4 x usb, 2 x com
Hide thumbs
Table of Contents

Advertisement

Quick Links

2I380D
Intel Bay Trail-D J1900 (Quad Core) CPU,
On Board DDR3L, 3 x Intel LAN / USB / VGA / COM
All-In-One
Intel Bay Trail-I D J1900, 2.0 GHz
VGA, PCIe mini card, M.2 B Key SATA
Multi-LAN Board, 4 x USB, 2 x COM
NO. 2I380D_V0.1
Release date: Feb. 10. 2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2I380D and is the answer not in the manual?

Questions and answers

Related Manuals for Lex Computech 2I380D

Summary of Contents for Lex Computech 2I380D

  • Page 1 2I380D Intel Bay Trail-D J1900 (Quad Core) CPU, On Board DDR3L, 3 x Intel LAN / USB / VGA / COM All-In-One Intel Bay Trail-I D J1900, 2.0 GHz VGA, PCIe mini card, M.2 B Key SATA Multi-LAN Board, 4 x USB, 2 x COM NO.

  • Page 2: Table Of Contents

    1-5 PACKING LIST ......................CHAPTER 2 HARDWARE INSTALLATION ..............2-1 UNPACKING PRECAUTION ..................2-2 UNPACKING CHECKUP ....................2-3 DIMENSION-2I380D ....................2-4 LAYOUT-2I380D-CONNECTOR MAP ................2-4-1 LAYOUT-2I380D-FUNCTION MAP ................2-5 DIAGRAM-2I380D ....................... 2-6 LIST OF JUMPERS ...................... 2-7 JUMPER SETTING DESCRIPTION ................
  • Page 3 4-6-3 USB CONFIGURATION..................... 4-6-4 Video CONFIGURATION ..................4-6-5 Thermal CONFIGURATION ..................4-6-6 SATA CONFIGURATION ..................4-6-7 ACPI TABLE / FEATURES CONTROL ..............4-7 SECURITY ........................4-8 POWER ........................4-9 BOOT ........................... 4-9-1 LEGACY ........................4-9-2 BOOT TYPE ORDER ....................4-10 EXIT ........................... 4-11 DEVICE MANAAGER ....................
  • Page 4 Copyright This manual is copyrighted and all rights are reserved. It does not allow any non authorization in copied, photocopied, translated or reproduced to any electronic or machine readable form in whole or in part without prior written consent from the manufacturer.

  • Page 5: Warning

    Warning ! Battery Batteries on board are consumables. The life time of them are not guaranteed. 2. Fless solution with HDD The specifi cation & limitation of HDD should be considered carefully when the fanless solution is implemented. We will not give further notifi cation in case of changes of product information and manual.

  • Page 6: Hardware Notice Guide

    Hardware Notice Guide 1. Before linking power supply with the motherboard, please attach DC-in adapter to the motherboard fi rst. Then plug the adapter power to AC outlet. Always shut down the computer normally before you move the system unit or remove the power supply from the motherboard.
  • Page 7 Photo 1 Insert Unplug...

  • Page 8: Chapter 1 General Information

    Chapter-1 General Information The 2I380D SBC with built-in 3 x Intel Giga LAN ports, 1 USB 3.0 & 3 USB 2.0 ports as an economic and fl exible hardware platform for industrial communication solution. A reliable and effi cient communication network which connects all the components of the factory to work together effectively plays an important role of success industrial automation.

  • Page 9: Major Feature

    1-1 Major Feature 1. Intel Bay-Trail J1900 2.00GHz SOC (Quad core) 2. Intel Bay-Trail Integrated Graphics chipset, J1900 688 MHz to 854MHz render clock frequency 3. On board DDR3L SDRAM 2GB Memory, data transfer rate of 1333MT/s 4. Support 3 x 10 / 100 / 1000 Mbps Intel LAN ports 5.

  • Page 10: Specification

    1-2 Specifi cation 1. SOC: Intel Bay-Trail J1900 2.00GHz (Qaud core) 2. Memory: DDR3L SDRAM 2GB Memory, data transfer rate of 1333MT/s 3. Graphics: Intel Bay-Trail Integrated Graphics chipset, J1900 688 MHz to 854MHz render clock frequency 4. I/O Chip: F81801U I/O chipset for 2 ports RS232 / 485 / 422 auto selected 5.

  • Page 11: Directions For Installing The Mini Card

    1-3 Directions for installing the Mini Card 1. Unscrew the screw on the board 2. Plug in the Mini Card in a 45 angle 3. Gently push down the Mini Card and screw the screw back.

  • Page 12: Directions For Installing The M.2B Key Mini Card

    1-4 Directions for installing the M.2B Key Mini Card 1. Unscrew the screw on the board 2. Plug in the Mini Card in a 45 angle 3. Gently push down the Mini Card and screw the screw back.

  • Page 13: Packing List

    1-5 Packing List Material Code Description Detail Specifi cation Quantit 7G1901-1640001-0 MB-2I380D-D92-001 LLF,2I380D-D92,Rev.:001 6G8006-2349-0100 LEX Product Driver DVD LF, Intel Baytrail Driver,Windows 7/8.1 32/64 6G6003-7329-0100 Power Cable LF,L=9cm,2.0 1*2/DC JK 6G5212-0301-0600 30W Power Adapter,12V/2.5A LF,L Type,EA1024H1(06),EDAC *The packing list above is for the users who purchase single motherboard. The users who purchase the board with chassis may refer to the packing list in the Assembly Guide.

  • Page 14: Chapter 2 Hardware Installation

    1. Ground yourself by a grounded wrist strap at all times when you handle the 2I380D. Well secure the ALLIGATOR clip of the strap to the end of the shielded wire lead from a grounded object.

  • Page 15: Unpacking Checkup

    2-2 Unpacking checkup First of all, please follow all necessary steps of section 2-1 to protect 2I380D from electricity discharge. With reference to section 1-4 please check the delivery package again with following steps: 1. Unpack the 2I380D board and keep all packing material, manual and driver disc etc, do not dispose ! 2.

  • Page 16: Dimension-2I380D

    2-3 Dimension-2I380D...

  • Page 17: Layout-2I380D-Connector Map

    2-4 Layout-2I380D- Connector MAP LED1 JSB1 CBT1 NGFF1 MPCE1 CPI1...
  • Page 18 2-4 Layout-2I380D- Connector MAP...

  • Page 19: Layout-2I380D-Function Map

    2-4-1 Layout-2I380D-Function MAP LAN1 RJ45 USB3.0 Power Button LAN3 RJ45 LAN2 RJ45 LED1 CMOS UP: Power JUMPER Down:HDD Battery NGFF1 Mini PCIe / mSATA / USB M.2 B-Key2242 DC-IN SATA-based SSD +12V / 24V...
  • Page 20 2-4-1 Layout-2I380D-Function MAP USB 2.0 USB 2.0 USB 2.0...

  • Page 21: Diagram-2I380D

    2-5 Diagram- 2I380D LED1 JSB1 CBT1 NGFF1 MPCE1 CPI1 BACK Panel- 2I380D USB 3.0 Power Buttom USB 2.0...

  • Page 22: List Of Jumpers

    2-6 List of Jumpers JSB1: CMOS DATA clear 2-7 Jumper Setting Description A jumper is ON as a closed circuit with a plastic cap covering two pins. A jumper is OFF as an open circuit without the plastic cap. Some jumpers have three pins, labeled 1, 2, and 3.

  • Page 23: Jsb1: Coms Data Clear

    2-8 JSB1: CMOS Data Clear A battery must be used to retain the motherboard confi guration in CMOS RAM. Close Pin1 and pin 2 of JSB1 to store the CMOS data. To clear the CMOS, follow the procedures below: 1. Turn off the system and unplug teh AC power 2.

  • Page 24: Chapter 3 Connection

    Chapter-3 Connection This chapter provides all necessary information of the peripheral's connections, switches and indicators. Always power off the board before you install the peripherals. 3-1 List of Connectors CBT1: Li 3V battery 2 pin (1.25mm)wafer CPI1: +12V power input 2 pin (2.0mm) wafer Red. CG1: VGA wafer 2 x 5 pin (2.0mm) wafer CC1,CC2:...

  • Page 25: Battery Connector

    3-2 Battery wafer CBT1 3V Battery 2pin (1.25mm) wafer PIN NO. Description VBAT pin1 CBT1 3-3 DC Power input CPI1: DC Power input (2pin 2.0mm Wafer) (Red) PIN NO. Description DC-IN(12V to 24V) Note: Very important check Dc-in Voltage pin1 CPO1...

  • Page 26: Vga Connector

    3-4 VGA connector CG1: VGA 2x5pin 2.0mm wafer connector PIN NO. Description PIN NO. Description BULE DDC CLOCK GREEN V-SYNC H-SYNC DDC DATA pin1 3-5 COM port connector CC1 / CC2: Two RS232 ports (2x5pin 2.0mm Wafer) PIN NO. Description PIN NO.
  • Page 27 CC1 / CC2: Two RS485 ports (2x5pin 2.0mm Wafer) PIN NO. Description PIN NO. Description RS485 TX- RS485 TX+ Note: BIOS need setting to RS485 mode. pin1 pin1 CC1 / CC2: Two RS422 ports (2x5pin 2.0mm Wafer) PIN NO. Description PIN NO.

  • Page 28: Usb 2.0 Port

    3-6 USB 2.0 port CU1 / 2 / 3: USB 2.0 Type A Connector PIN NO. Description DATA- DATA+ CU4: USB3.0 / 2.0 Type A Connector (USB 2.0 Option) PIN NO. Description PIN NO. Description USB 3.0 TX+ USB 2.0 D- USB 3.0 TX- USB 2.0 D+ USB 3.0 RX+...

  • Page 29: Lan Connector

    3-7 LAN Connector CL1 / 2 / 3: RJ45 LAN Connector PIN NO. Description PIN NO. Description TD0+/TX+ TD2-/NC TD0-/TX- TD1-/RX- TD1+/RX+ TD3+/NC TD2+/NC TD3-/NC CL1 RJ45 LAN Connector-LED defi ne Giga / 100MB Connector Right Left Back side con RED LED GREEN LED YELLOW LED...

  • Page 30: Pci Express Mini Card

    3-8 PCI Express Mini card MPCE1 Support mSATA /PCIe/USB interface (Full Size) PIN NO. Description PIN NO. Description +3.3V +1.5V PCIe-CLK- PCIe-CLK+ RST- PCIe-RX-/mSATA-RX+ +3.3V PCIe-RX+/mSATA-RX- +1.5V SMB-CLK PCIe-TX-/mSATA-TX- SMB-DATA PCIe-TX+/mSATA-TX+ USB-DATA- MPCE1 USB-DATA+ +3.3V +3.3V +1.5V mSATA-Detect +3.3V...

  • Page 31: Pci Express M.2 B Key Mini Card

    3-9 PCI Express M.2 B key Mini card Support SATA-based SSD Interface (Mini card socket 75pin) PIN NO. Description PIN NO. Description +3.3V +3.3V B KEY DEVSLP NGFF1 mSATA-RX+ USB-DATA- mSATA-RX- USB-DATA+ mSATA-TX- mSATA-TX+ +3.3V +3.3V +3.3V...

  • Page 32: Introduction Of Bios

    Chapter-4 Introduction of BIOS The BIOS is a program located in the Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gains control. The BIOS first operates an auto-diagnostic test called POST (Power on Self Test) for all the necessary hardware, it detects the entire hardware devices and configures the parameters of the hardware synchronization.

  • Page 33: Bios Menu Screen & Function Keys

    4-2 BIOS Menu Screen & Function Keys InsydeH20 Setup Utility Rev. 5.0 Main Advanced Security Power Boot Exit BIOS Version 2I380D D2 Build Date 02/08/2017 Build Time 15:34:19 Processor Type Intel(R) Celeron(R) CPU J1900 @ 1.99GHz System Memory Speed 1333 MHz Cache RAM 2048 KB...

  • Page 34: Getting Help

    4-3 Getting Help InsydeH20 Setup Utility Rev. 5.0 Main Advanced Security Power Boot Exit [General Help] The Setup Utility is a ROM-based configuration utility that displays the system’s configuration status and provides users with a tool to set their system parameters. Setting incorrect values may cause system boot failure: Load setup default values to recover <Left/Right>...

  • Page 35: Menu Bars

    4-5 Main InsydeH20 Setup Utility Rev. 5.0 Main Advanced Security Power Boot Exit BIOS Version 2I380D D2 Build Date 02/08/2017 Build Time 15:34:19 Processor Type Intel(R) Celeron(R) CPU J1900 @ 1.99GHz System Memory Speed 1333 MHz Cache RAM 2048 KB...

  • Page 36: Advanced

    4-6 Advanced InsydeH20 Setup Utility Rev. 5.0 Main Advanced Security Power Boot Exit Configures Boot Settings Boot Configuration PCI Express Configuration USB Configuration Video Configuration Thermal Configuration SATA Configuration ACPI Table/Features Control Help Select F5/F6 Change Values Setup Defaults Exit Select Menu Enter Select...

  • Page 37: Boot Configuration

    4-6-1 Boot Confi guration InsydeH20 Setup Utility Rev. 5.0 Advanced Boot Configuration Selects Power-on state For Numlock Numlock <On> Help Select F5/F6 Change Values Setup Defaults Exit Select Menu Enter Select SubMenu Save and Exit Numlock Select Power-on state for Numlock, default is <ON> 4-6-2 PCI Express Confi...

  • Page 38: Pci Express Root Port 1/2/3/4

    4-6-2-1 ► PCI Express Root Port 1 / 2 / 3 / 4 InsydeH20 Setup Utility Rev. 5.0 Advanced PCI Express Root Port 1 Control the PCI Express Root Port. PCE Express Root Port 1 <Enable> PCIE Port 1 Speed <Gen1>...

  • Page 39: Video Configuration

    XHCI Mode Mode of operation of xHCI controller. The optional settings are: Best Auto (default), Enabled, Disabled. Mini Card USB2.0 Mini card or USB2.0 select. The optional settings are: Disabled(default), Enabled. When Mini card use USB2.0 (Enabled), USB3.0 port only supply USB3.0. When Mini card do not use USB2.0, USB3.0 port have support USB3.0 / USB2.0.

  • Page 40: Thermal Configuration

    4-6-5 Thermal Confi guration InsydeH20 Setup Utility Rev. 5.0 Advanced Thermal Configuration Parameters This value controls the temperature of The ACPI Critical Trip Critical Trip Point <110 > Point – the point in Passive Trip Point <105 > Which the OS will Shut the system off.

  • Page 41: Sata Configuration

    4-6-6 SATA Confi guration InsydeH20 Setup Utility Rev. 5.0 Advanced SATA Configuration DISABLED: Disables SATA Controller. SATA Controller <Enabled> ENABLED: Enables Chipset SATA Mode <IDE> SATA Controller. SATA Speed <Gen1> IDE Mode <Native IDE> SATA Port 0 Connected to an ODD <Enabled>...

  • Page 42: Acpi Table / Features Control

    SATA Port 1 Connected to an ODD Use this item to Enable or Disable SATA Port1 ODD function The optional settings are: Enabled (default) or Disable SATA Port 1 Connected to an ODD Use this item to Enable or Disable SATA Port1 ODD function The optional settings are: Enabled (default) or Disable 4-6-7 ACPI Table / Features Control InsydeH20 Setup Utility...

  • Page 43: Security

    4-7 Security InsydeH20 Setup Utility Rev. 5.0 Main Advanced Security Power Boot Exit Supervisor Password Not Install Install or Change the password and the length of password must be greater Set Supervisor Password than one character. Help Select F5/F6 Change Values Setup Defaults Exit Select Menu...

  • Page 44: Boot

    Wake on LAN Determines the action taken when the system power is off and the PCI power management Enable wake up event occurs. The optional settings: S3, S5, S3 / S5, Disabled (default) Wake on USB The optional settings: S3, Disabled (default) 4-9 Boot InsydeH20 Setup Utility Rev.

  • Page 45: Legacy

    4-9-1 Legacy InsydeH20 Setup Utility Rev. 5.0 Boot Boot Device Priority Select Normal Boot Option Priority or Advance Boot Option Normal Boot Menu <Normal> Priority. Boot Type Order Help Select F5/F6 Change Values Setup Defaults Exit Select Menu Enter Select SubMenu Save and Exit Normal Boot Menu...

  • Page 46: Exit

    4-10 EXIT InsydeH20 Setup Utility Rev. 5.0 Main Advanced Security Power Boot Exit Exit system setup and save your changes. Exit Saving Changes Save Change Without Exit Exit Discarding Changes Load Optimal Defaults Discard Changes Help Select F5/F6 Change Values Setup Defaults Exit Select Menu...

  • Page 47: Device Manaager

    4-11 Device Manager Please press the key F10 when boot up to go into the Device Manager menu Device Manager Devices List About Super IO Setting SIO FINTEK81801U Press ESC to exit. =Move Highlight <Enter>=Select Entry Esc=Discard Changes Serial Port 1/2 Confi guration Please refer section 4-11-1...

  • Page 48: Sio Fintek81801U

    4-11-1 SIO FINTEK81801U SIO FINTEK81801U Serial Port 1 <Enable> Configure Serial port using options : Disable No Base I/O Address <3F8> configuration [Enable] Interrupt <IRQ4> User configuration Serial Mode <RS232 driver> [Auto] EFI/OS chooses Serial Port 2 <Enable> configuration Base I/O Address <2F8>...

  • Page 49: Hardware Monitor

    Serial Mode RS232 driver (default): When hardware select to RS232 or RS422 mode, please enter to RS232 driver. RS485 driver: When hardware select to RS485 mode, please enter to RS485 driver. It is the auto fl ow function for RS485. Power Failure This item specifi...

  • Page 50: Chapter 5 Driver Installation

    Chapter-5 DRIVER INSTALLATION There is a system installation DVD in the package. This DVD does not only include all the drivers you need but also some other free application programs and utility programs. In addition, this DVD also includes an auto detect software telling you which hardware is installed and which driver is needed so that your system can function properly.
  • Page 51 AUTOMATIC DRIVER INSTALLATION menu...
  • Page 52 1. INF Install Intel Baytrail chipset driver 2. VGA Install onboard VGA driver 3. Serial IO Install Serial IO driver (FOR Win 7 only) 4. xHCI Install Intel USB 3.0 xHCI driver (FOR Win 7 only) 5. HD Audio Install HD Audio Codec driver 6.

  • Page 53: Inf Install Intel Baytrail Chipset Driver (Example For Win8 64Bit)

    5-1 INF Install Intel Baytrail Chipset Driver (example for WIN8 64bit) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Intel® Chipset Device Software" menu" screen, click "INF". screen, click "Next". 3. At the "License Agreement" 4. At the "Readme File Information" screen, screen,click "Yes"...
  • Page 54 5. Click "Next" 6. Click "Finish" & restart computer. NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 64 / 32-bit, X:\driver\INTEL\BAY\INF\WIN7\infi nst_autol.exe For Windows 8 / 8.1 32 / 64-bit X:\driver\INTEL\BAY\INF\WIN_8_64\infi nst_autol.exe...

  • Page 55: Vga Install Intel Baytrail Vga Driver (Example For Win8 64Bit)

    5-2 VGA Install Intel Baytrail VGA Driver (example for WIN8 64bit) 1. At the"AUTOMATIC DRIVER INSTALLATION 2. At the "Welcome to the Setup Program menu"screen, click "VGA". screen, Click "Next". 3. At the "License Agreement" screen, 4. At the "Readme File Information" screen, Click "Yes"...
  • Page 56 6. Click "Finish" to restart computer 5. At the "Setup Progress" screen, Click "Next". NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32-bit, X:\driver\INTEL\BAY\VGA\WIN_7_32\Setup.exe For Windows 7 64-bit X:\driver\INTEL\BAY\VGA\WIN_7_64\Setup.exe For Windows 8 / Windows 8.1 32-bit X:\ \driver\INTEL\BAY\VGA\WIN_8_32\Setup.exe For Windows 8 / Windows 8.1 64-bit X:\driver\INTEL\BAY\VGA\WIN_8_64\Setup.exe...

  • Page 57: Serial Io Install Driver Baytrail Serial Io Driver (For Win7 Only)

    5-3 Serial IO Install Driver Baytrail Serial IO Driver (FOR Windows 7 only) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Welcome to the Setup Program menu"screen, click "Serial IO" screen, Click “Next”. 3. At the "License Agreement” screen, 4.
  • Page 58 5. At the "Ready to install the program” screen, 6. Click “Finish” and restart computer Click "Install" NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32-bit, X:\driver\INTEL\BAY\SERIALIO\WIN7_32Bit.msi For Windows 7 64-bit X:\driver\INTEL\BAY\SERIALIO\Win7_64Bit.msi...

  • Page 59: Xhci Install Intel Usb 3.0 Xhci Driver (For Win7 Only)

    5-4 xHCI Install Intel USB 3.0 xHCI Driver (FOR Windows 7 only) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Welcome to the Setup Program menu", screen, click "xHCI". screen, Click “Next”. 3. At the "License Agreement” screen, 4. At the "Readme File Information” screen, Click "Yes"...

  • Page 60: Hd Audio Install High Definition Audio Driver (Example For Win8 64Bit)

    5. At the "Setup Progress” screen, Click “Next” 6. Click “Finish” to restart computer. NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32 / 64-bit, X:\driver\INTEL\BAY\XHCI\Driver_Installer\Setup.exe 5-5 HD Audio Install High Defi nition Audio Driver (example for WIN8 64bit) 2.

  • Page 61: Mbi Install Intel Mbi Driver (For Win 8/8.1 Only)

    3. Click "Finish" to restart computer NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32 / 64-bit, Windows 8/8.1 32 / 64-bit X:\driver\INTEL\BAY\SOUND\Win7_Win8_Win81_R273.exe 5-6 MBI Install Intel MBI Driver (FOR Win 8/8.1 only) 1. At the "AUTOMATIC DRIVER INSTALLATION 2.
  • Page 62 4. At the "Setup Progress” screen, Click “Next”. 3. At the "License Agreement” screen, Click "Yes". 5. Click “Finish” to restart computer. NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 8/8.1 32 / 64-bit, X:\driver\INTEL\BAY\MBI\Setup.exe...

  • Page 63: Txe Install Intel Txe Driver

    5-7 TXE Install Intel TXE driver 5-7-1 TXE Install for WIN8 / WIN8.1 2. At the "Setup” screen, Click “Next”. 1. At the "AUTOMATIC DRIVER INSTALLATION menu", click "TXE" 3. At the "License Agreement” screen, 4. Click "Next" Click "Yes"...

  • Page 64: Txe Install For Win7

    5. Click “Finish” & restart computer NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 8 32 / 64-bit, X:\driver\INTEL\BAY\TXE\WIN_8\SetupTXE.exe For Windows 8.1 32 / 64-bit, X:\driver\INTEL\BAY\TXE\WIN_8.1\SetupTXE.exe 5-7-2 TXE Install for WIN7 Please install TXE Patch fi rst. 1.
  • Page 65 3. Click “Finish” & restart computer 5. At the "TXE Setup” screen, Click “Next”. 4. At the "AUTOMATIC DRIVER INSTALLATION menu",click "TXE " 7. Click "Next". 6. At the "License Agreement” screen, Click "Yes".
  • Page 66 8. Click “Finish” & restart computer NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32 / 64-bit, TXE Patch X:\driver\INTEL\BAY\TXE\WIN_7\kmdf-1.11-Win-6.1-x86.msu X:\driver\INTEL\BAY\TXE\WIN_7\kmdf-1.11-Win-6.1-x64.msu X:\driver\INTEL\BAY\TXE\WIN_7\SetupTXE.exe X:\driver\INTEL\BAY\TXE\WIN_7\SetupTXE.exe...

  • Page 67: How To Update Lnsyde Bios

    STEP 3. Copy the latest BIOS for your LEX motherboard from our website to your bootable disc. STEP 4. (Here take 2I380D as an example, please enter your motherboard’s name) Insert your bootable disc into X: (X could be C:, A: or others.

  • Page 68: Appendix A:power Consumption Test

    Appendix A: Power Consumption Test Condition Item Spec Atom E3845 1.91 Ghz / Celeron J1900 1.99 Ghz Memory DDRL 1333 4GB / DDRL 1333 2GB Operating System Windows 7 / SP1 Test Program 3D Mark 06 mSATA 64GB Test Result for reference only ! Start up Operation Shut down...

  • Page 69: Appendix B:resolution List

    Appendix B: Resolution list 640 x 480 x ( 256 / 16bit / 32bit ) 800 x 600 x ( 256 / 16bit / 32bit ) 1024 x 768 x ( 256 / 16bit / 32bit ) 1152 x 864 x ( 256 / 16bit / 32bit ) 1280 x 600 x ( 256 / 16bit / 32bit ) 1280 x 720 x ( 256 / 16bit / 32bit ) 1280 x 768 x ( 256 / 16bit / 32bit )

Table of Contents