Unpacking The Units - Chroma Studio Force II 12 User Manual

Unpacking the units

The Studio Force II package includes the Studio Force II fixture, power cord, preinstalled mounting bracket
and a Quick Start Guide. It is strongly recommended that original packaging is kept, for the ease of
transportation.
Cabling
TM
The Studio Force II utilizes Neutrik powerCON true1 connectors for power input and through connections.
The DMX control data input and through connections are via two Neutrik XLR 5-pin male and female
connectors. The chassis are ground bonded.
XLR-5 Pinout:
Pin# Function
1 Ground (Screen)
2 Data Minus
3 Data Plus
4 Spare Data Minus
5 Spare Data Plus
Table 1 (XLR PIN)
Power Cable Pinout:
International
Connections
Colour Code
Green and Yellow Earth (E)
Blue Neutral (N)
Brown Live (L)
Important Notice:
The use of an optical splitter for DMX signal distribution is highly recommended when several fixtures are
not plugged into the same power source.
Maximum Number of fixtures connected in a series:
Important Notice: Actual number of fixtures connected in series may be lower, based on your branch circuit
inrush rating.
Fixture
SF II 72
SF II 48
SF II 12
Power and Data Input Location
Figure 1 (Connection)
North American
Colour Code
Green
White
Black
Table 2 (Power Cable Colour Code)
Wattage @110V
800W 2 x SF II 72
550W 3 x SF II 48
150W 10 x SF II 12
Table 3 (Fixtures in series)
www.chroma-q.com
Connections
Ground (Green)
Neutral (Silver)
Hot (Gold)
@220V
4 x SF II 72
6 x SF II 48
20 x SF II 12
4