Chroma Studio Force II 12 User Manual page 22

Lock feature
Factory default sets the display screen to turn off and lock when untapped for 30 seconds. A lock symbol
appears on the screen, when tapped. This feature provides protection against accidental user input.
To disable or enable the lock,
Figure 16 (Lock Feature Select Screen)
If the Lock feature is enabled, touch and hold the lock icon for 5 seconds to unlock.
Figure 17 (Lock Feature Select Icon)
On the Main Menu, tap Setup Menu
On the Setup screen, tap Lock button.
On the Lock Feature screen, tap Enable or Disable, then tap Apply to save
www.chroma-q.com
Display Lock Icon
Note: The Lock Icon turns
green when pressed and
held for 5 sec to unlock
17