Chroma Studio Force II 12 User Manual page 13

Configuration option buttons
DMX
The factory default address is 1. The LCD screen displays the current DMX start address and the new DMX
start address. In this screen, the numeric command buttons can be tapped, to set the new DMX start address.
New Address to assign
Cancel / go back to Main menu
Command Button
0 – 9
Apply
Escape
To set/change the DMX start address,
1. Main menu, tap on DMX
Next screen will be, "Change DMX Address"
2.
3. Tap on 0-9 command buttons in combination, to enter the new DMX start address
4. Tap on Apply to save
5. Control goes back to the Main menu screen and the new DMX start address will be displayed
6. Tap on Escape anytime to cancel
Mode
Mode options
Mode Select options
Grouping options
Cancel / Go Back
Figure 8 (DMX Change Screen)
Tap in combination, to enter the new DMX start address
Tap to save the new DMX address.
Tap to Exit the screen.
Table 5 (DMX Change Command Buttons)
Figure 9 (Mode Options Screen)
www.chroma-q.com
8
Description
Current Address
Command Buttons
Apply to save
Pixel Ordering Options
Apply Changes/Save