Chroma Studio Force II 12 User Manual page 11

Spring Plungers are pre-installed at the far ends of the accessory slot to lock in-place the slide-in panels. The
height of the spring plungers is pre-set at the factory and requires no further adjustment.
Control
TM
Studio Force II fixture can operate as a stand-alone unit or can be controlled remotely via ANSI E1.11
USITT DMX 512-A protocol. The control function settings can be accessed through the touchscreen LCD
display at the rear of the fixture.
Power-up Screen:
•
Press and hold for 5 sec to
unlink from a Lumenradio
RF transmitter
•
Tap on Focus button to turn
ON the fixture for 30 sec
Figure 4 (Beam Angle)
Figure 5 (Optional slide-in lenses)
Figure 6 (Start-up Screen)
www.chroma-q.com
6
No Power Menu Access:
Insert a small blunt object, such
as a paperclip, into the hole to
turn the display ON and
configure the fixture when it is
not connected to the AC mains
power.