Chroma Studio Force II 12 User Manual page 23

Reset and Factory Defaults
In this menu,
Figure 18(Reset Settings Screen)
To save the current user settings,
"Save User" for 5 seconds to save the current settings.
(Follow the text prompt that appears on the screen)
To reset the fixture to the save user settings,
1. On the Main Menu, tap Setup Menu
2. On the Setup screen, tap Reset
3. On the Reset Setting screen, tap User
4. Press and hold Apply for 3 seconds to restore the saved user settings
To reset the fixture to the factory default settings,
1. On the Main Menu, tap Setup Menu
2. On the Setup screen, tap Reset
3. On the Reset Setting screen, tap Default
4. Press and hold Apply for 3 seconds to restore the factory default settings
• Current user settings can be saved.
• The fixture can be reset to the save user settings.
• The fixture can be reset to the factory default settings. All recorded Looks are
erased.
1. Review all settings
2. On the Main Menu, tap Setup
Menu
3. On the Setup screen, tap Reset
4. On the Reset Setting screen,
press and hold
www.chroma-q.com
18
DMX Address 1
Foot Print 3ch (1-3)
Mode KHI
Lock Disabled
Pixels All
DMX Lost Last data
(HOLD)
Fan Speed Live
Frequency 750Hz
Reset Default
Flip L
Cine-Q 8b Enabled
Table 15 (Factory Default Settings)
R